Hey man, coming from you that is a compliment! I have taken some serious flak for those seats, (import wanna be, etc) but after this weekend and really driving the car hard, they are by far my favorite--once I saw them in your car, I knew they were a good choice! As I mentioned in my PM to you awhile back, I really liked the look of those black centered wheels on your car and it got me thinking about it on mine.

You are right about tire size, I had to get narrower than what I started with to fit them on the front. Would have liked to stay wider for performance, however, once I had the stance down where I wanted it, I couldn't make myself bring it back up. My drag car sits low like this (also a 69) and I was pretty determined to get it where I wanted it. I knew I would sacrafice some things like tire width in front to get it sitting this way, but that's what was important to me. The other biggie for me was that it could still perform at that ride height without rubbing and scrapping everything (hence things like shorty style headers to get the exhaust as tight as I could, switching to button heads on the inner fenderwell, etc.) The other huge piece that made the difference was Jon at Driverz. He really worked with me to get the backspacing just right. Still hoping to see your car at the streetcar shootout.

Doug

Very cool looking car!!
glad we could help

Really, I've never been razzed about my seats once. I bet it's your buddies giving you a hard time. Can you imagine running an autocross with stock seats. :lol:

That 19/20 combo with the addition of the half height body bushings help it look lower than it is in reality. I have run mine similar height in the front and slighly higher in the back. I found when it got to low in the back, my rear yoke contacted the tunnel lightly. It wasn't something I heard. I suppose my added horsepower along with large contact patch out back combined with the soft setting I use on the street doesn't help me. I've got it where I can punch it in first gear and hook it up now with my r888's. It really squats nice. I would be on the lookout as your springs settle to make sure you don't get to low for your tunnel. Measure your ride height now so you can reference it later. You could always fabricate a bump stop on both axles if needed. The stock stuff won't work. On the front I added the 275's and the r888's seem to be more square. The first time I autocrossed them the course had 2 tight 90 degree turns. That was the only point where I had a rub and it was on the outside on both sides. Since I've added camber and raised the front a hair. I'm running my next autocross in a few weeks. I'm sure it will be fine.

I'm glad you finally posted some photos. You did a great job:thumbsup:

Don't resist the urge to overload us with more pics! :cool:

Thank you! F 19x8 235 35
R 20x9 275 35

Ok, here's a few more---Barry White (from Barrys Street Rods or SMC I think- he's a local down this way) picked some cars for awards--he presented--was neat. I had a different impression of him from watching him on TV, he was a very cool down to earth guy all weekend and I really enjoyed getting to know him. His crew were also very good guys--I never would have thought they could or would appreciate a build in progress like mine, but I was wrong. It's nice to be surprised now and again.

There were guys taking what looked to be professional pics--still trying to track down who they were. I'd like to get my hands on those if I could. If they are available, once I get them I will put them up. Thanks for wanting to see more--coming from this community, that is a great feeling!

Doug

Todd, great tips. I did measure it and have those written down, as I was prepared to raise it if necessary for the autocross or open track days. Negative camber is a friend of mine now--it helped the clearance obviously, but it has just the right balance for freeway and autocross at the moment. Will keep an eye on the tires to see how quickly I tear through them.

Yeah, you are right about the seat comments--all buddies of mine---one of them also felt that I ruined the car by taking the rally wheels off---LOL--

I never was a fan of the 19 and 20 combo, but you are exactly right, the car does look lower than it really is with this setup. The body mounts really helped that as you've said, and the other item that causes it to look so low, believe it or not, is the wheel moulding. Without it, it really does look higher both front and rear by at least a 1/4 of an inch. I felt it added to the look I was after, so after removing it, I ended up putting it all back on.

Good to see more pics. Your car looks great of course Doug. :thumbsup:

I'm interested in what condition your '69 was in when you started, and who did what as far as bodywork and paint, if you don't mind sharing that info.

Sure-- I purchased this car about 1.5 years ago off Ebay--came from Georgia. Seller described it as about a 6.5 out of a 10 for black paint. He was right I would say. I've stretched it to maybe a 7.5 with a cut and buff and some panel alignment. Gaps aren't very good on the car overall. I was really hoping for driver quality with this purchase, as paint/ body and interior are the things I am not able to do on my own. The rest of the car needed attention as it was completely stock for the most part--someone had replaced both quarters and the trunk pan.

Things like wiring, squeeks and rattles, the annoying stuff I fixed in the first year. I then added the seats, 4th gen console, steering wheel, addressed the suspension front and rear (rear will get converted this next year) and then moved onto tires and wheels. It was really important to me to get a car with driver quality paint and body as I knew I would really want to drive it quite a bit and not be afraid of the occasional chip in the paint that seems impossible to avoid with a black car. It also came with the vintage AC, which, believe it or not, was a selling point for me. I believe I paid 22 k for the car and feel pretty good overall about it. If I could learn one thing more, it would be paint and body, as it is hard for me to justify spending 20k on a paint job--although, I know I would if circumstances were right. I attached some pics of it from the ebay add.

Thanks for the insights into your buy and build process Doug.

The a/c can be a real big selling point, especially since your family comes along for the ride. :)

Purchase price seems very fair IMO and its nice to read about an ebay story that worked out too.