Lateral-g Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Lateral-G Sponsor News: Sales, New Product Info (https://www.lateral-g.net/forums/forumdisplay.php?f=43)
-   -   New Vendor Sponsor--new Vintage (https://www.lateral-g.net/forums/showthread.php?t=24749)

redfire69 01-17-2010 01:26 PM
I was thinking of running just the two big gauges with all six indicators like you have shown above for the datsun. I'd like something that would fit in a modified stock dash.

marks914 01-17-2010 01:29 PM
Quote:
Originally Posted by redfire69 (Post 262330)
I was thinking of running just the two big gauges with all six indicators like you have shown above for the datsun. I'd like something that would fit in a modified stock dash.
Sure, send we can do that, just let me know what gauges you want and we can come up with a plan.
Here are the 3-1s with the Camaro theme on them, still rough though.
Mark
http://inlinethumb64.webshots.com/45...600x600Q85.jpg

redfire69 01-17-2010 04:11 PM
Quote:
Originally Posted by marks914 (Post 262332)
Sure, send we can do that, just let me know what gauges you want and we can come up with a plan.
Here are the 3-1s with the Camaro theme on them, still rough though.
Mark
http://inlinethumb64.webshots.com/45...600x600Q85.jpg
That's exactly what I had in mind! I'll be in touch- Ron

70rs 01-17-2010 06:43 PM
Mark, what is the total outside diameter on the gauges show above? Those are pretty cool!

marks914 01-17-2010 11:05 PM
1 Attachment(s)
Quote:
Originally Posted by 70rs (Post 262383)
Mark, what is the total outside diameter on the gauges show above? Those are pretty cool!
It depends,
Those were 4-9/16" hole which I believe works out to about 5" OD (see installed in 67-68 below. We can build those right now, but once we open them up and reface the warranty is void. They are also expensive (retail for about $600.00 for a custom set) to purchase, reface and install. They are a good product, just if something goes wrong we do not have any recourse with the manufacturer.
We are working on a set that is basically the same but we will build here in house that is 4-3/8 mounting hole, 4-3/4 OD. They will have full stepper motor technology and be available in through the dial and perimeter lighting.
Mark

Bowtieracing 01-18-2010 05:07 AM
Fantastic Mark!!

You have PM:cheers:

Rick Dorion 01-18-2010 05:35 AM
Very nice! Is that a stock 68 housing?

marks914 01-18-2010 05:58 AM
Yes they will fit in a stock 67-68 housing and also fit 69s. We should have our version underway in about a week.
Mark

70rs 01-18-2010 12:02 PM
Quote:
Originally Posted by marks914 (Post 262444)
It depends,
Those were 4-9/16" hole which I believe works out to about 5" OD (see installed in 67-68 below. We can build those right now, but once we open them up and reface the warranty is void. They are also expensive (retail for about $600.00 for a custom set) to purchase, reface and install. They are a good product, just if something goes wrong we do not have any recourse with the manufacturer.
We are working on a set that is basically the same but we will build here in house that is 4-3/8 mounting hole, 4-3/4 OD. They will have full stepper motor technology and be available in through the dial and perimeter lighting.
Mark
Great information Mark. Thanks! I like all of the options that are now available.

68400BIRD 01-19-2010 09:57 AM
I'm assuming these are all electric hook up and not mechanical?
Do they come with sensors or can you use your stock ones?
How about the speedo?
Are these hook up friendly with AAW kits?
I would also be interested in something fitting into the stock location on my 68 Firebird.


All times are GMT -7. The time now is 09:47 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net