Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)
-   -   Custom Water/Methanol Injection Setup (https://www.lateral-g.net/forums/showthread.php?t=25328)

Blown353 02-23-2010 05:14 PM

Quote:

Originally Posted by TheKingOTW (Post 271157)
To pull excess heat out from under the hood. I machined the stock hood louvers between the ribs to open them up. It drops under hood temps by as much as 30-40 degrees and engine temp by 5-10 degrees.

I'm taking note of this idea. :)

Do you have the fan sucking hot air out of the engine compartment or blowing cool air in? Can't tell if it's a puller or pusher fan in the pics.

Also, I'd like to see some pics of how you reworked the hood internal bracing around the other vents you added.

TheKingOTW 02-25-2010 11:49 AM

Quote:

Originally Posted by Blown353 (Post 271259)
I'm taking note of this idea. :)

Do you have the fan sucking hot air out of the engine compartment or blowing cool air in? Can't tell if it's a puller or pusher fan in the pics.

Also, I'd like to see some pics of how you reworked the hood internal bracing around the other vents you added.

The fan sucks the hot air out through the stock hood ornaments that I machined. I will try and take some pics for you to see.

TheKingOTW 02-25-2010 12:03 PM

Just had the car on the Dyno. After making some A/F adjustments, the car picked up about 70HP, making 1085HP.

Sti_Guy 02-25-2010 04:42 PM

Thats some nice gains almost 10% what fuel is your base?

TheKingOTW 02-28-2010 06:33 AM

Quote:

Originally Posted by Sti_Guy (Post 271684)
Thats some nice gains almost 10% what fuel is your base?

93 Octane Pump Gas.


All times are GMT -7. The time now is 05:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net