Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   Rear suspension options with 335 tires (https://www.lateral-g.net/forums/showthread.php?t=25927)

1955LSX 03-29-2010 07:19 PM
The Morrison front & rear setup looks good, it seems to cost ALOT more than all the other kits. I'm considering modifying a TCI 3 link to fit 335 tires..

slow4dr 03-31-2010 10:28 AM
Richard Balas' '67 Camaro has a TCI 4-link and a 335 tire on it using a DSE tub. He modified the outside lip of the TCI coilover crossmember to match the frame rail after the DSE tub install. Check out page 91 of the May 2010 Goodguys Gazette for a good picture of the car. :cheers:

chevyhector 03-31-2010 10:42 AM
Do any of you guys know of a reputable location in the Los Angeles area to get a 4 link installed?

Ron in SoCal 03-31-2010 01:17 PM
Quote:
Originally Posted by chevyhector (Post 279124)
Do any of you guys know of a reputable location in the Los Angeles area to get a 4 link installed?
Fab Tech in Chatsworth. The owner's name is Jamie...

chevyhector 03-31-2010 01:25 PM
COOL ! but isn’t Fab tech an off road truck place?

slow4dr 03-31-2010 02:41 PM
Quote:
Originally Posted by chevyhector (Post 279172)
COOL ! but isn’t Fab tech an off road truck place?
Must be a different place since Fabtech(offroad company) is in Chino.

Ron in SoCal 04-01-2010 07:11 PM
Quote:
Originally Posted by chevyhector (Post 279172)
COOL ! but isn’t Fab tech an off road truck place?
Yes they are, but two different companies. This one is owned by a good guy, and he's even been featured in CHP a few times...

ItDoRun 04-03-2010 02:58 PM
I have the Chassisworks G-Link in mine with 335's.

Silver69Camaro 04-05-2010 06:00 AM
Quote:
Originally Posted by 1955LSX (Post 278681)
The Morrison front & rear setup looks good, it seems to cost ALOT more than all the other kits. I'm considering modifying a TCI 3 link to fit 335 tires..
Actually, if you include the axle housing, axles, and third member, it's close to DSE's complete setup.

Our goal is to get people to quit using the .045"-thick factory frame rails.

1955LSX 05-04-2010 06:46 PM
looked for that issue & couldn't find it! anyone have a link to his spread?

Quote:
Originally Posted by slow4dr (Post 279122)
Richard Balas' '67 Camaro has a TCI 4-link and a 335 tire on it using a DSE tub. He modified the outside lip of the TCI coilover crossmember to match the frame rail after the DSE tub install. Check out page 91 of the May 2010 Goodguys Gazette for a good picture of the car. :cheers:


All times are GMT -7. The time now is 02:15 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net