Lateral-g Forums - Metal Shaping.....anyone into it?

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Metal Shaping.....anyone into it? (https://www.lateral-g.net/forums/showthread.php?t=27005)

Quote:

Originally Posted by pacificustoms (Post 289398)

Here's some pictures of stuff:

One of the first pieces ever building, a third brakelight I built for a Ford
http://i55.photobucket.com/albums/g1...s/P2280017.jpg

Front radiator support cover piece and radiator mount for a GTO
http://i55.photobucket.com/albums/g1...s/IMG_1140.jpg

Just started building these inner fender and underhood pieces for a new Denali
http://i55.photobucket.com/albums/g1...alismall97.jpg

Close out looks bitchen Rob!!!

Here's one I just finished up. This stuff is the best!!! Especially when your given no time line and pressure to pull off the impossible !!! Alittle bit of your own creativaty and getting lost in another world.

Here are some doors that I am almost finished with, they are for a 34 roadster pickup and they are completly scratch built. the doors are 3" longer than stock. Also a quick photo of the flloors in the camaro that I am working on. Thanks, Jon.S