Lateral-g Forums - any pro-tour'd 67' barracudas??

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - any pro-tour'd 67' barracudas?? (https://www.lateral-g.net/forums/showthread.php?t=27418)

autoxcuda

06-25-2010 06:49 PM

Quote:

Originally Posted by XcYZ (Post 293375)

Looking good, Steve. What does your car weigh?

Years ago on a Co-op grain elevator scale it was 3350 lbs with:

Cast iron exhaust manifolds
aluminum intake
cast iron heads
stock brass radiator
cast iron water pump
15x7 steel police rims at that time (thicker/heavier than rallye 15x7's)
12" upgraded stock front disks, stock cast iron calipers

I've never got it on a set of four good digital scale pads so I don't know how accurate that 3350 number is.

autoxcuda

06-25-2010 07:10 PM

Quote:

Originally Posted by 4thechallenge (Post 293373)

I have two pics of a 67 cuda that I took at the sting fling. Email me and I can send them to u. I can't post from my iPhone
[email protected]

That Bob Reed's cruiser 67 Barracuda with a nice complement of choice 68 trim mixed in. He has a Red 68 Barracuda (Car Craft?) that has a more racey setup in it.

Some specs:
-360 magnum stroked to 408
-Tremec 5
-Willwood 6-piston brakes
-Bob's suspension mods

http://www.cpwclub.com/SF10Pics/stev...eWSatMd476.JPG

http://www.cpwclub.com/SF10Pics/stev...eWSunMd009.JPG

autoxcuda

06-25-2010 07:11 PM

Quote:

Originally Posted by wellis77 (Post 293386)

Here are a few I found searching...

http://fc01.deviantart.com/fs20/f/20...zvtdesigns.jpg

:thumbsup: I like !!

That's racey ! :bow:

ArisESQ

06-27-2010 11:15 AM

http://fc01.deviantart.com/fs20/f/20...zvtdesigns.jpg

I'm loving that one. The rear end of the 67' looks so proper with a huge tire underneath it. I'd love to build something like that one day.

All times are GMT -7. The time now is 11:53 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page