Lateral-g Forums - metal brakes and other home made tools to save on the budget.

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Shop & Equipment (https://www.lateral-g.net/forums/forumdisplay.php?f=56)

- - metal brakes and other home made tools to save on the budget. (https://www.lateral-g.net/forums/showthread.php?t=29645)

GregWeld

12-13-2010 04:29 PM

Quote:

Originally Posted by brans72 (Post 321711)

Nice stands you posted up Greg see I know your always making stuff just wanting to brag about it when time comes huh? :D

Don't want to pop your bubble - but posting those stands was just about someone else wanting to see some -- to get ideas... and I DID NOT make those! Had I made them.... the bottoms would have been "finished" and there'd be a cross piece at the bottom to keep the bottoms from doing the splits. :D

I use protected jack stands if I have a chassis on the 'ground' otherwise I use my lift... and I have some Race Ramps stuff etc...

brans72

12-13-2010 04:48 PM

Lift!!!! Your spoiled there Greg! Next house I plan on 40x40 and lift right off and the wife knows it already. Figure now be happy with a 24x30 I say garage with a/c that houses my Chevelle and her 67 C10.

GregWeld

12-13-2010 05:02 PM

Quote:

Originally Posted by brans72 (Post 321752)

:yes: :D :cheers: :woot:

E.rodz

12-13-2010 06:30 PM

here is a rotisserie that I made a couple of years ago. think I might even finish my english wheel some day.
http://i643.photobucket.com/albums/u...rch2009008.jpg
I am with Greg maybe someday I can find time to use my tools.lol.

All times are GMT -7. The time now is 08:22 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page