Lateral-g Forums
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Lateral-G Sponsor News: Sales, New Product Info (https://www.lateral-g.net/forums/forumdisplay.php?f=43)
-   -   Sneek Peak Ironworks 64-72 chevelle chassis (https://www.lateral-g.net/forums/showthread.php?t=30166)

coolwelder62 01-08-2011 07:36 PM
Rodger as alway's,awesome.:thumbsup: Scott

GregWeld 01-08-2011 08:24 PM
Nice buddy! Very nice.

:thumbsup: :woot:

skatinjay27 01-08-2011 09:03 PM
Quote:
Originally Posted by Musclerodz (Post 325879)
what if someone wants to stop?
in the spirit

VANS
NIKE
DC
PUMA
ETC...

ironworks 01-08-2011 09:25 PM
Thank's guys, I'm looking forward to cutting out these two chassis's this week. We have done some pretty trick stuff to this chassis to make it stronger and require less welding to assemble. Eric has really stepped up his skills with what we have come up with on this. I bet we have exchanged a thousand - emails and late night phone calls to get to this point. I thought our Tri-5 unit was nice, but this one is a whole other deal.

Good job Eric

Rodger

mexMan 01-08-2011 09:36 PM
Quote:
Originally Posted by Musclerodz (Post 325879)
what if someone wants to stop?
They only asked for ''roller'', never for ''stopper''... :rolleyes:
Looks awesome, I like how you ''watermark'' your products with the Ironworks lettering, love it.

214Chevy 01-08-2011 09:56 PM
Can someone buy just a bare frame? Just asking since I already have a 9" rear end and C5 suspension stuff.

ironworks 01-08-2011 10:09 PM
Well the brackets on the 9inch housing are custom and We use a certain fabricated housing to make room for exhaust. Plus there is custom machine work on the spindles for our steering arms. And the chevelle has a custom lower control arm to allow us to lower the rack for engine clearance. But you could sub in some parts as long as they are correct for the application. But some parts are just built or ordered for this application. I suppose you could save yourself a decent little chunk if you had some of the parts already.

214Chevy 01-09-2011 08:50 AM
Quote:
Originally Posted by ironworks (Post 325931)
Well the brackets on the 9inch housing are custom and We use a certain fabricated housing to make room for exhaust. Plus there is custom machine work on the spindles for our steering arms. And the chevelle has a custom lower control arm to allow us to lower the rack for engine clearance. But you could sub in some parts as long as they are correct for the application. But some parts are just built or ordered for this application. I suppose you could save yourself a decent little chunk if you had some of the parts already.
That's exactly why I was asking in terms of saving a little bit of money. I could fab in my own rear end and front suspension parts. I could never build this frame though. It is amazing!! :hail: Therefore, I just wanted to know if a bare frame would be available for us do-it-yourself guys.

61ragtop 01-09-2011 09:10 AM
Makes me want a 64-72 Chevelle!!! Great work:hail: :woot: :willy: :wow: :bow: :cheers:

nvr2fst 01-09-2011 09:21 AM
Nice work Rodger and Eric. Glad to see you guys getting more into producing production parts/chassis. Do you plan on expanding your shop if your chassis line takes off? Producing front/rear clips?

Will there be production frames in the future to mimic chassis like mine, Tylers and Johns car :lol:


All times are GMT -7. The time now is 06:16 PM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net