Oh it is a monster!!! Can't wait to hear this thing, it is going to be r-tarded!:unibrow:

Top notch work there Tyler, looks great! Am I missing something in the pic, how will you remove those headers if needed?

the headers are 8 individual tubes and flanges. The flange at the head is split into 4 pieces per side, and they are into a slip fit connector. I am not sure of how well this holds up, but its a race car thing that Lemons must do regularily for clearance issues like this. Probably will have to get some stage 8 locking header bolts or something to help keep them in place

Once that car gets running it is going to give children nightmares...

Too sweet man...

It sure does tuck up nicee and tight. Very Nice.

those headers are the best thing ever for a big motor chevelle. we got em on our 66 with 2.25" primaries and they fit outstanding. no problems with leaks whatsoever with just regular header bolts. didnt like the copper gaskets so plain old felpros do the trick. just be prepared to cut the inner fenders out alot to clear them.

http://i24.photobucket.com/albums/c2...xseven/119.jpg

best picture i could find.

Nice chevelle!! (Yeah thats TWO exclaimation points :thumbsup:

Got most of the rear end finished today on the Chevelle project. Its a Fab9 housing, with wishbone mount, antiroll bar mounts, gussets and tie down bars for trailering.

http://i1204.photobucket.com/albums/...e/IMG_3932.jpg

http://i1204.photobucket.com/albums/...e/IMG_3930.jpg

http://i1204.photobucket.com/albums/...e/IMG_3928.jpg

Just gotta throw it in the jig and install the housing ends!

Ok here's an update! Chassis and all its components went out for powder. Here's some of the other goodies that ended up on the chassis.

Aeromotive A1000 pump mount
http://i1204.photobucket.com/albums/.../pumpmount.jpg

Frame gussets/fishplates
http://i1204.photobucket.com/albums/...le/gussets.jpg

Front brace with integrated tow/tie down hooks, as well as the mid and front plate mounts
http://i1204.photobucket.com/albums/...elle/front.jpg

Custom Mid plate
http://i1204.photobucket.com/albums/...e/midplate.jpg

And the focal point of the front end, a CNC machined Motorplate!!!! Its o-ringed on each side of the water pump too!
http://i1204.photobucket.com/albums/...motorplate.jpg

http://i1204.photobucket.com/albums/...otorplate2.jpg

Also, Jeff if you look close you can see we added a gusset on the rack mount and changed the whole driver side rack mount. We changed the input shaft angle, and made a nice laser cut mount with gussets.

Cheers!

Tyler,

Very impressive, top notch looking work. Any luck on the gauge pod yet for the chevelle?