Pm'd you..

It looks like Bob Reams work we use alot of his injection we have four here now.

Greg
PCC

http://www.racetep.com/ztripdcoe.html#twmtbod
Ive seen them on z forums before.

http://www.twminduction.com/Throttle...dy2900-FR.html
twm has some too


I think inglese may do something similar too, some people use individual throttle bodies and get the same look. Overseas use bike throttle bodies in a side draft form on smaller engines.

Here it is;
http://www.verycoolparts.com/index.htm

I could be a real smartass here but I'll save it.

Deleted

I know this is an old thread but here is what you are looking for, http://www.stackinjection.com.au/mai...d860867e1f9573

A guy here in Australia fitted one and was not happy with the quality of the casting. He had to do a lot to make it fit and work.

thanks! Love the IR systems.

The pic from the original poster looks like the intake used on that propane powered BBC that was at SEMA a few years back... I'll have to look back I think I might have some pics.... Not sure who made it though...

The Very Cool Parts manifolds are made by DC&O out of Australia. I deal with a lot of these on the Unique Performance cars. The machine work is so-so.. and if you don't know how to set one up you will fight it forever and the car will never run right. Beyond MSD distributors hitting the front of the manifold I've never had any fitment issues.

Thanks for that link... I've been fortunate enough not to have needed any hard parts for them yet but the small dealings I've had with Very Cool Parts have been less than inspiring. I'm glad to have another source to get parts. I've never had any luck finding contact information for DC&O directly and as far as I know VCP is the only US dealer.

http://i696.photobucket.com/albums/v...rkCSC40159.jpg

I know the watermark is annoying... its an old pic from when I was having issues with people stealing pics from my website and posting on their own as their work...

yes im the guy who has this setup here in australia .. i did have a lot of problems with the manifold not fitting right.. i had to machine it in places for the distributor and the thermostat housing to fit.. etc etc.. the 52mm throttlebodys are nice,, all this is aussie made in sydney .. I have a 383 sbc i use a fast ezi efi system which i intergrated myself , a ricks tank... it all works well and i had no major drams ,,you just got to get the system all sealed up nice and good fuel system , correct timing .. reasonably foolproof if you follow instructions to the letter.
http://i221.photobucket.com/albums/d...CARFEST021.jpg

From one 8 stack fanboy to another.....

That's awesome!