what width tire and wheel can you run with it?

Currently the biggest practical is a 9.5 wide with a 275/285, we are currently looking to redesign the sway bar (with hellwig) to fit a 10 and 295, it will physically fit right now just looking for a bit more turning

sounds good you have a fire sell on these things anytime soon????? looks like a nice product and what i intend to do with the car.:thumbsup:

No Fires here???

lol
:thumbsup:

thanks blake ill be in touch.

Are you going to come out with a torque arm rear setup to go with this? I remember talk of this at one time but can't find it on your website.

Also, what headers are you using with LS motors and your Streetfighter front suspension?

Don

We are starting the Torque Arm Suspension at the end of the month for the second gen cars, i have 2 in the shop now that we will be using for test fitting on. A 73 the other is a 81 both will be minitubbed as well. so it should be ready early in 2012. the sooner the better i know we have a bunch presold.
As for the headers for the second gen streetfighter any header that fits the stock sub frame will work, I know there are not alot of choices, we are in the next couple days scheduled to check our existing LS headers to see if they are close to fitting.

Now that Edelbrock is gone the only header option I can find is BRP mounts and headers. I hope you add headers because right now that is what would push me to AME or JRS - they have headers.

Thanks,
Don

Well heres the bad news, the headers we currently have only the driver side will fit, with our mounts. I have a call into Stainlessworks to see if they would be willing to let us design a pass side header to fit, so stay tuned.