Lateral-g Forums - Project "Resurrection"

Page 2 of 4

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Project "Resurrection" (https://www.lateral-g.net/forums/showthread.php?t=31924)

coolwelder62

05-16-2011 10:38 AM

Pro ject starting to come along nicely.:thumbsup:

ruquik

05-16-2011 11:40 AM

2 Attachment(s)

Thanks, pics of the assembled front and D.S. lower Valance

Rybar

05-16-2011 11:45 AM

Looks good, you guys are doing a very nice job on the rebuild.

ruquik

05-16-2011 12:10 PM

new wheels

2 Attachment(s)

New 18x12 Budnik Gassers and 335s, test fit

ruquik

05-16-2011 12:22 PM

Bumper

2 Attachment(s)

Bumper work, shortened end to end, then shortened the sides. Lowered down bumper below the ridge on Tail panel

waynieZ

05-16-2011 04:18 PM

I love the bumper tucked in like that. looks good.

NvrDun71

05-16-2011 06:33 PM

Looks great Roy, looking forward to working with you guys in the future on some sheetmetal work for my 71'

ruquik

05-17-2011 06:48 AM

Engine cover

2 Attachment(s)

Working the fitment of the engine cover we chose. Fiberglassed in the mounting hardware so it will snap on and off just like a new car.

ruquik

05-17-2011 06:56 AM

Exhaust

4 Attachment(s)

Custom built complete 3 inch stainless exhaust system. Used Stainless Works headers that we had to modify a little to fit the new TCI frame. Bought a set of Lexus 400 exhaust tips and modified them to fit the lower rear valance.

Northeast Rod Run

05-17-2011 06:34 PM

Quote:

Originally Posted by ruquik (Post 348409)

Working the fitment of the engine cover we chose. Fiberglassed in the mounting hardware so it will snap on and off just like a new car.

Is that a Holden Monaro engine cover?

All times are GMT -7. The time now is 08:10 PM.

Page 2 of 4

Show 40 post(s) from this thread on one page