Finally got the door skinned!
 

Got out to the garage and got the passenger door skinned, and did that ever make a mess, some rust in the corners of the frame should come out nice with some POR15. I cleaned and vacuumed the inside and thought I'd put some pixs of the floor that I DON"T HAVE TO FIX! :woot:

http://img213.imageshack.us/img213/8...11dec00901.jpg
Floor that doesn't need fixing!

http://img535.imageshack.us/img535/4...11dec00801.jpg
Ditto
http://img833.imageshack.us/img833/9...11dec01201.jpg
Got the skin off the frame.
http://img827.imageshack.us/img827/9...11dec00202.jpg
Rust in the corners of the frame, not bad

Welcome Buddy! Looks like a pretty solid foundation. Great job so far. Keep up the good work!:thumbsup:

Thanks
 

Thanks for the welcome. It's the shops and the magazine coverage that have kept me going with my Camaro, you guys do some fantastic work and inspire me to do my best with what I have to work with. Now ..... to narrow done some of these choices.:unibrow:

Thanks for the welcome.

Thanks, I thought I'd share my build, don't really have a deadline, guess.... when it's done it's done. :unibrow:

Update 12/31
 

Update 12/31 Garage time spent wisely with the passenger door, cleaned all the rusted areas and POR15 the frame. When the POR15 dries I'll put a coat of POR black on the frame and tackle the skin later this weekend. I haven't done a skin before so .... this is new to me.:D
I need to do the same with the back side of dash that has the same level of rust, that will be next on my to do list.

http://img803.imageshack.us/img803/5...11dec00203.jpg
Rusted areas POR15'd

http://img27.imageshack.us/img27/2913/2011dec00103.jpg
Better than new!

Happy New Year!
 

[B]Happy New Year I worked in the garage last night waiting for 2400, I thought I'd post these pictures of my rotor that was rusted from sitting around (bought the 12 bolt already set up and never run), I used a plastic flapper wheel and used Eastwood's Fast Etch, soaking for an hour (?). Following the directions these came out pretty nice. :thumbsup:
The dash in on my list, not enough bad rust to replace but definitely needs some POR15.
http://img51.imageshack.us/img51/7536/2011dec00204.jpg
Wilwood rotors - not a pretty sight
http://img194.imageshack.us/img194/5...11dec00902.jpg
Fast Etch really worked well, left a zinc coating!
http://img703.imageshack.us/img703/7347/dscn1628m.jpg
The not so good dash:(
Thanks
Michael

Dash POR'D
 

Update 1/2 Nice day to work in the garage, got the back side of the dash cleaned and used POR15 to preserve the metal, when it gets warmer outside I'll spray some POR black on the dash and the inside of the passenger door. Really wished the factory would have galvanized more than the trunk drop off and the rocker panels - sure would have saved me some time!
One thing at a time and something every day makes progress!

http://img641.imageshack.us/img641/9479/2012jan002.jpg
Dash POR'd and better than new
http://img836.imageshack.us/img836/8778/2012jan003.jpg
Ditto

Update 1/4
 

Logged some time in the garage Did some work on the firewall, used a circular disc and cleaned off the paint and surface rust in preparation for new cowl. Not sure if I'll delete any factory mods yet. Just getting ready for some epoxy primer when the weather gets a little warmer, don't have to worry much about rust issues here in CO!

http://img638.imageshack.us/img638/7...12jan00201.jpg
Cleaning firewall

http://img233.imageshack.us/img233/9877/2012jan006.jpg
Getting there, looking much better!

A little time in the garage everyday helps!

Great project, your car looks to be in very nice shape.
:cheers: