No I don't really have a build thread

Its the gto bracket. IM going to have issues with the head unit hitting the control arm. IM going to make some spacers/brackets.

I had originally used the gto bracket also. It just isn't a good bracket for the 1st gens. The Corvette bracket is much better. You also have to modify the inner fender too much. You also lose turning radius cause the wheel will hit the modified inner.

I think im going to put some spacers in between the bracket and the block to move it forward and have a pulley made or make a spacer for between the crank and the pulley. Or make a bracket to move the entire set up north a few inches to clear suspension and a arm

MOcking up everything...
Rs billet grille, custom valance, etc
https://lateral-g.net/forums/atta...1&d=1332737407

https://lateral-g.net/forums/atta...1&d=1332737407

https://lateral-g.net/forums/atta...1&d=1332737407

https://lateral-g.net/forums/atta...1&d=1332737407

https://lateral-g.net/forums/atta...1&d=1332737407

https://lateral-g.net/forums/atta...1&d=1332737407

Nice project!

I would listen to Bob...lots of good info there!

Nice I love the firewall. This will be a bad ass car when its done!

Someday lol. thanks. I cant wait to hear the engine and get the mini tub in.

Ordered the McLeod Rxt clutch and McLeod flywheel, Aeromotive 1000 pump and regulator, ati procharger crank pulley, ati super damper, and 80lb injectors. Wow, Little parts that put a big dent in your wallet. lol. Should have more pics as part roll in.

So how do i get a vender sponsor? Ive had this car since i was i was 13 and im 24 now. I will never sell this car lol. Im just getting to the point im needing some help on paying for stuff. And a guy said i should talk to venders about my build, which i think is modest, compared to the big boys lol.