Lateral-g Forums - Low oil pressure "new" Mast Motorsports LS3 427

Page 2 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Engine (https://www.lateral-g.net/forums/forumdisplay.php?f=37)

- - Low oil pressure "new" Mast Motorsports LS3 427 - what next? (https://www.lateral-g.net/forums/showthread.php?t=39192)

Sieg	11-20-2012 06:55 PM

Quote:

Originally Posted by Chad-1stGen (Post 447404)

Well I connected with Mast today. If I pay the shipping to/from them they will tear down the motor and inspect it. Assuming they don't find anything that is clearly caused by improper installation they will fix it. No idea what it costs to ship a motor from CA to to TX but time to find out.

:thumbsup:

Ask them who their preferred carriers are.

Chad-1stGen

11-20-2012 07:09 PM

I can purchase shipping through Mast at their rate which makes it $385 each way or $770 round trip. Shipping motors isn't cheap.

Plan to pull the motor this weekend and need to find a crate or at least a pallet I can build a crate around in order to ship it back.

Flash68

11-20-2012 07:20 PM

Quote:

Originally Posted by Chad-1stGen (Post 447459)

That's a very good deal on shipping a motor halfway across the country. Try getting quotes and you'll agree. :thumbsup:

I would do it if it were me Chad, for sure.

Flash68

11-20-2012 07:22 PM

Quote:

Originally Posted by dontlifttoshift (Post 447449)

I looked in project updates, damn near every builder is in there. Did a search and came up with nothing. Could you link to the threads where this was.

It doesn't seem at all like Mast was reluctant in this case, considering Chad was not the original purchaser and any warranty has time out at this point.

A serious engine is the single most expensive part of building these cars and Mast is at the top of my short list to supply it. I don't take rumors, statements, or otherwise lightly when it comes to things like this.

I agree Donny.

XLexus.... I would think since you're willing to say this publicly you might be willing to share details privately.... I have PM'ed you for this info if you would care to oblige.

Thanks

Track Junky

11-20-2012 09:07 PM

Sorry to hear of your troubles Chad. Cant say I haven't been there before. $385 sounds reasonable as it cost $350 each way to Indiana and back.

GregWeld

11-21-2012 10:58 AM

Quote:

Originally Posted by Chad-1stGen (Post 447459)

I think that is extremely generous of them to try to make it as painless as possible. Given that you're not the original purchaser... and the age of the motor since purchase etc.

I'd prefer to have the original builder tear into it than have someone else... if it was my motor.:thumbsup:

XLexusTech

11-21-2012 11:42 AM

Quote:

Originally Posted by Flash68 (Post 447463)

Reply sent on 11/20...:thumbsup:

Sieg	11-21-2012 12:15 PM

Quote:

Originally Posted by GregWeld (Post 447555)

100% in agreement :thumbsup:

If I was Mast there's a multitude of reasons I'd want to have control of the resolution process as well.

Spiffav8

11-22-2012 12:09 PM

I talked with the guys from MAST during SEMA this year. Great people who take a lot of pride in their work! I have no doubt they will take care of you.

Mkelcy

11-29-2012 03:27 PM

Chad: Anything happening?

All times are GMT -7. The time now is 05:28 PM.

Page 2 of 3

Show 40 post(s) from this thread on one page