Damn that pushrod for blocking that port! :lol:

Those do look good. How much for a set cnc'ed like that?

Mark for the CnC Track 1's they are something like $2400.Pushrod?there is no pushrod there :lol: .

try looking at the RHS heads formerly known as Pro Top Line
here's a link for you

Cylinder heads

here you can check out all your choices

I did not want to go over board with my first 383 project so i only ordered Dar 215 cc heads with the optional 2.08/1.625 valve and factory porting.

They were really nice for a couple years until I felt the need to upgrade.

What you really need to look for in a head is good flow like 280 minimum CFM intake and the correct CC for your application. The victor Jr or pick up some used AFR 210's That way you won't feel the need to upgrade so soon!

i will see your cnc'd track 1's and raise ya a set of cnc'd and hand finished sb2.2's.

2.17in/1.6ex, 49cc chambers, 285cc intake runners, havent flowed them yet...so no cfm info "yet"
http://img112.imageshack.us/img112/7281/sb220026nm.jpg
http://img112.imageshack.us/img112/1056/sb220031hr.jpg
http://img112.imageshack.us/img112/3306/sb220045jf.jpg

http://img49.imageshack.us/img49/2614/sb220013wb.jpg
hand finished intake port

http://img96.imageshack.us/img96/257/sb220056md.jpg
cnc'd intake port

http://img96.imageshack.us/img96/737/sb220063ku.jpg
cnc'd chamber

Now that's cool. :yes:

Jon how long did you have to wait on your CNCd T1s?

Just a couple of weeks Rob.