doors
 

The Camaro got a set of C6 corvette door handles. I know this has been done before, but I like the look of them on the second gen Camaro's.

http://i1072.photobucket.com/albums/...0Camaro001.jpg

Here is the rear spoiler. just slightly lower than the short second gen spoiler.

http://i1072.photobucket.com/albums/...0Camaro004.jpg

http://i1072.photobucket.com/albums/...0Camaro002.jpg

Here is the detail shot of the end of the spoiler.

http://i1072.photobucket.com/albums/...0Camaro003.jpg

Ready for paint.

I really like the rear spoiler. A Lot !!

Really nice Ed. Who is making this one reality?

Looking good. Those door handles look like they could have, or should have come from the factory.

I think those are C5 door handles - looking good!

Engine & Suspension
 

Marty, Glad you like the rear spoiler. I wanted something shorter that the stock mid height spoiler so this is what we came up with.
Wayne -The handles are C5 and they do look like they were for this shape of car with the body lines.

Well the guy I got this from had installed the new motor and tranny but after the car was in primer and the over spray was real bad as you can see. I was going to pull the motor but thought since all the suspension was coming off and all the new parts would be installed that once I got it down to nothing I could just paint the sub frame.
http://i1072.photobucket.com/albums/...ps3bdb3dcb.jpg
Here is the start of putting on the Vintage Air Front Runner, New water pump and spacers.
http://i1072.photobucket.com/albums/...psbeefd792.jpg
Here is the upper section all together before it bolts to the water pump.
http://i1072.photobucket.com/albums/...ps2647fdf4.jpg
Vintage Air does a great job on making all this real tight and compact. I like the way the lines are all hidden as much as you can.
http://i1072.photobucket.com/albums/...psc8e71ec4.jpg
http://i1072.photobucket.com/albums/...ps163c483a.jpg
Here is how this all looks on the front of the engine.
http://i1072.photobucket.com/albums/...psbc44a5f4.jpg
http://i1072.photobucket.com/albums/...psafb17afc.jpg
http://i1072.photobucket.com/albums/...psa018be59.jpg

Now it is time for the Baer Brakes and the DSE suspension parts to go on this project. :ups:

Goodguy Ed:thumbsup:

That looks great on there.

The DSE suspension will make this 2nd Gen corner and perform great. I am installing the front kit with A-Arms, Coils, sway bar and the DSE shocks.
http://i1072.photobucket.com/albums/...ps60fec62e.jpg
http://i1072.photobucket.com/albums/...ps32133e1e.jpg
Greasable sway bar so it does not ever make any noise.
http://i1072.photobucket.com/albums/...ps62d0cd74.jpg

Now it is Baer Brakes time..6 Piston front and rear. Silver to match the cars color with the red letters.
http://i1072.photobucket.com/albums/...ps2c1e02dd.jpg

http://i1072.photobucket.com/albums/...psc52483fd.jpg

Like the way the Baer Brakes come with all the items needed to make this one professional kit.
http://i1072.photobucket.com/albums/...ps552cf35d.jpg

OK now to see the brakes with the new Intro wheels. I did a custom powder coating to the center of the wheels to match the stripe that will be on the car. The outer hoop is brushed with a roller lip.
http://i1072.photobucket.com/albums/...ps694d2466.jpg
http://i1072.photobucket.com/albums/...psd3a8989c.jpg
Got the BFGoodrich tires mounted.

http://i1072.photobucket.com/albums/...psc491db26.jpg
http://i1072.photobucket.com/albums/...pse57a93be.jpg

Little more work to go.
Goodguy Ed

Looking good, the small changes make a huge difference on the car. Do you have any more pics of the wheels and tires mocked up on the car? I am debating using almost the same wheels on my 72.

Looks great.