Lateral-g Forums
Page 2 of 54 1 2 341252 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project ""Mercury Rising"" 1969 Camaro (https://www.lateral-g.net/forums/showthread.php?t=41460)

Rick D 06-05-2013 11:50 PM
Nice, love the new wheels!

coolwelder62 06-06-2013 08:00 AM
Cool Project!!!

Richio1 06-06-2013 11:25 AM
Yep, looking forward to seeing this one come together.

cjfirstgen 06-13-2013 08:32 AM
Sending the intake to Mark at BENT Custom & Performance so he can work his magic. Will clean up that wiring too.

http://i305.photobucket.com/albums/n...ps0bb1bdab.jpg

cjfirstgen 06-13-2013 05:26 PM
Sent the front shocks off to Varishock for a rebuild (one was leaking from the top seal) then reassembled. Super fast turn around.

http://i305.photobucket.com/albums/n...ps71c19f33.jpg

Jay Hilliard 06-13-2013 05:32 PM
Very nice build. That Hogan intake is sweeeet! They make some nice peices. The intake would look awesome black or gunmetal.

cjfirstgen 06-13-2013 05:49 PM
Quote:
Originally Posted by Jay Hilliard (Post 486291)
Very nice build. That Hogan intake is sweeeet! They make some nice peices. The intake would look awesome black or gunmetal.
That would be very tempting if I did not have all natural/polished billet throughout. Gunmetal would look bad ass. The Concept 1 pulley system is anodized brushed in natural which I already have. I was going to have the intake polished after it returns from Mark. Works with the polished Ron Davis radiator. Plenty of black anodized plumbing/hardware is planned. What do you think?

cjfirstgen 06-13-2013 10:44 PM
Headers are done. 3.5" 304SS V-Bands then CermaChrome from Jet-Hot.

http://i305.photobucket.com/albums/n...psb2cf68a8.jpg

cjfirstgen 07-30-2013 01:48 PM
Some pics of the SS fuel lines from the master Mark Bohlen of Bent Performance. Now to rework some wiring, throttle cable then to polish.


http://i305.photobucket.com/albums/n...pse99471a9.jpg

http://i305.photobucket.com/albums/n...ps14a8b6d0.jpg

http://i305.photobucket.com/albums/n...ps0eb1159c.jpg

http://i305.photobucket.com/albums/n...ps9491990a.jpg

Engine block and valve covers smoothed and re-sprayed....oil pan is next.

http://i305.photobucket.com/albums/n...ps9a388136.jpg

fleetus macmullitz 07-30-2013 03:42 PM
Quote:
Originally Posted by cjfirstgen (Post 481266)
Thanks for the comments! Much inspiration comes from the builds on this forum.

Need some guidance on limiting turn stops with the rack and pinion. Speaking with Chassisworks they know their system turns sharper than it should. They suggest spacers to remedy the issue. Running 265/35 tires now and will be going to 275/35 tires with the new inner fenders. The issue is not the offset if that is what you suspect. I would like to know what turn limiter spacers you have used or recommend. I could always make my own too. Thanks in advance.
Were you able to get the info you needed?


All times are GMT -5. The time now is 09:54 PM.
Page 2 of 54 1 2 341252 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net