Lateral-g Forums - Speed Tech Shop Project: Down Under 69

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Speedtech Performance USA (https://www.lateral-g.net/forums/forumdisplay.php?f=90)

- - Speed Tech Shop Project: Down Under 69 (https://www.lateral-g.net/forums/showthread.php?t=42066)

you guys do really good work can't wait to see it finished

Quote:

Originally Posted by SRD Art (Post 490083)

Hey all-

Just wanted to start a thread on a car we're working on here at Speed Tech Performance. This 69 Camaro hails from Austrailia and came to us in a pretty rough state.

http://i1299.photobucket.com/albums/...ps4716451c.jpg

First order of business was designing the car, my first design/ rendering project with Speed Tech since joining their crew. For this project we're not looking to reinvent the wheel with radical body changes and add-ons. This one will be more smooth and subtle with some minor body mods and more focus on paint scheme and interior to stand out from the crowd.

http://i1299.photobucket.com/albums/...psdbec0a52.jpg

Although it had new rear 1/4s before it got to us, upon tear down we found lots of rust and a very beat up firewall which had been covered over with flat sheet metal. Unfortunately media blasting revealed even more rust. Here's the freshly blasted shell.

http://i1299.photobucket.com/albums/...ps908b758b.jpg

Since this shot we've replaced the roof inner structure and outer skin, shaved and formed the drip rail area, and built a completely new firewall.

As we move along the car will be getting our full pro-touring front sub frame and suspension package with a dual quad 572 nestled between the frame rails. The engine bay will have a cool twist on the overall paint scheme including of course a color matched engine. More coming soon...

http://i1299.photobucket.com/albums/...ps3e07fb39.jpg

Sweet looking engine!!!

Thanks guys. This car hails from the western side. We're working on mounts and such on the firewall and will post up pics when it's all worked out. :thumbsup:

Lots going on in the shop, including the wheels for the Camaro were delivered recently. Fronts are 19x9.5s and rears are 20x12s. Here's a couple shots of the back wheel. Nice DEEP lip and take look at this spoke color! Plans are to carry this theme throughout the car. More coming soon...

http://i1299.photobucket.com/albums/...ps02b44bf4.jpg

http://i1299.photobucket.com/albums/...pscb369aa5.jpg

A few more updates-

Sheet metal replacement is done, so along with the roof and inner structure, the firewall, and part of the trans tunnel, we also replaced both lower rocker panels and did some patch work here and there. Next step was prepping the floor for some under coat. We decided to do it in color, to contrast the black suspension parts and carry the theme of the concept artwork through to the bottom. How about that shade of yellow? Cool, eh?

http://i1299.photobucket.com/albums/...ps2665a216.jpg

http://i1299.photobucket.com/albums/...ps0187203a.jpg

We also have turned some attention to addressing some interior items. First off, we've used our new Trans Tunnel Cover to make room for the T-56. Such a simple install, it sure makes life easier than building a new tunnel.

http://i1299.photobucket.com/albums/...pse85f589d.jpg

Next we had to address the clearance issue that the DSE trailing arms create with the rear seat. Circled in yellow is the area that is required to be modified. In the second photo the yellow arrow shows how far forward the seat is pushed by the new trailing arm pocket. We like the simplicity of our Speedtech Torque arm rear suspension, the trailing arms bolt into the factory leaf spring pockets. This car came to us with this suspension already installed so we're changing things up a bit to make it all work.

http://i1299.photobucket.com/albums/...ps45ff2d96.jpg

http://i1299.photobucket.com/albums/...ps8ca752f2.jpg

http://i1299.photobucket.com/albums/...ps732a1b55.jpg

This car will be getting a Marquez dash and door panels, along with custom covered Recaro front seats and matching upholstery on the rear seats. You'll be seeing the black, yellow and red theme carried through the interior too. More coming soon...

Some long over due updates...

Getting ready to head into the body work booth...

http://i1299.photobucket.com/albums/...ps6e002339.jpg

After Getting the body laser straight it got jammed and is ready for some base coat...

http://i1299.photobucket.com/albums/...ps25ad6f0b.jpg

After the base coat and clear on the underside of things. Notice the cool filled in panels under the hood...

http://i1299.photobucket.com/albums/...ps99ea4765.jpg

getting some prep work done before laying down the stripes...

http://i1299.photobucket.com/albums/...ps7beee704.jpg

Back in the paint booth for stripes, pearl and clear coats...

http://i1299.photobucket.com/albums/...ps5fa99654.jpg

More coming soon...

Another one to the west.. Maybe I need to move there! That rendering looks awesome. Can't wait to see more of it

Aaah ticket me yellow!

Looks really nice

Lookin good ,....cant wait to see more