Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   Riding Close to Bumpstops (https://www.lateral-g.net/forums/showthread.php?t=42698)

6D9 Matt 08-20-2013 07:23 AM
Yeah I had actually emailed RideTech as well as a few other suspension vendors with their ideas. No responses yet though.

Hopefully Ridetech will jump in.

Nessumsar 08-20-2013 10:53 AM
Quote:
Originally Posted by BBC71Nova (Post 500135)
As I understand it, drop spindles are actually ok as long as you get the accompanying pieces like what comes with the Ridetech TruTurn setup. That should correct for what would be undesirable geometry if you only do the drop spindle.

Maybe the Ridetech guys will jump in here.
Sorry, I should have stated "factory style drop spindles" are a No No on 1st Gens. The likes of the AFX and Tru-Turn spindles have measures designed into them so that they work.

glassman 08-21-2013 07:30 PM
Quote:
Originally Posted by Shmoov69 (Post 500146)
What i done was Cut the bump stop down to about 1" tall.... Problem fixed!!! LoL!! Now got the spindle and tru turn kit, just not installed yet.
thats what i did on mine as well, my car is slammed, tire sits just at the fender lip, my collectors are 2.25 from the ground. I'm thinking of using it to till some fields.....

6D9 Matt 08-22-2013 11:12 AM
Thinking of investing in this package from Speedtech.

http://www.speedtechperformance.com/...rod/prd131.htm


All times are GMT -7. The time now is 07:50 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net