Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Speedtech Convertible '69 RS SS (https://www.lateral-g.net/forums/showthread.php?t=44665)

72Z/28 02-04-2014 03:19 PM

Quote:

Originally Posted by Ben@SpeedTech (Post 533788)
The exhaust on this car is 2.5" od. That is an Aeromotive fuel tank with internal Stealth 340 pump.

Ben do you guys have those tailpipes readily welded for this set? I have complete front and rear suspension from Speedtech and have the auromotive EFI tank. I have stainless steel works headers but with exhaust dumps and looking into getting the tailpipes

Ben@SpeedTech 02-04-2014 06:32 PM

Sorry to say it's all custom built in our shop. It's a tight fit so best bet would probably have someone locally bend them for you.

waynieZ 02-04-2014 07:39 PM

The tail pipes would probably be a nice item to make as an option to go with your truck arm kit. I bet it would be a good seller.

Ben@SpeedTech 02-04-2014 08:08 PM

Quote:

Originally Posted by waynieZ (Post 534104)
The tail pipes would probably be a nice item to make as an option to go with your truck arm kit. I bet it would be a good seller.

That's a great idea Waynie. Probably the biggest issue is it's a tight fit and you have to be careful how you run it so it doesn't vibrate on the car body or frame. It's doable but it takes some time to fit it right. Since there's several different tank options for these cars and with variances in assembly line inconsistencies, it would be tough to make one universal kit and have it fit each car. We do sell the entire stainless exhaust kit from headers back. It's a build it yourself deal where there are some prebent tubes but you have to cut and clip here and there to fit it perfectly to your specific car. If our kit is above the heads of some folks, a good custom exhaust shop could easily knock it out.

Dave Pratt 02-05-2014 07:37 AM

Great product
 
My neighbor bought a ton of suspension parts for his 66 Chevelle before you guys moved from Pitt Meadows and he had been busting my b...s over my 70 Roadrunner for long enough.The runner is sold as of last week and I'm looking for a 69 Camaro to start working on and even though you've moved out of the area I'm inclined to back the home team and your products...yes...his Chevelle handles fantastic by the way...best of luck to you and your team in the future and once I find a good 69 project you'll be getting a call...maybe even a visit.

Cheers...Dave

Ben@SpeedTech 02-05-2014 08:16 AM

Thanks for the compliments Dave, and glad to hear your bud's Chevelle is kickin'. As much as we like all cars, so far our research and development team has been tied up on GM products. Sad to hear the Roadrunner was let go, but picking up a Camaro opens a whole new world for you.

Our door is always open, and there is a lot of great places to visit within an hour or two to make your trip down a nice little vacation. Don't forget, you can bring the car and we can put it together for you too!


All times are GMT -7. The time now is 09:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net