The car is looking good nice to see you posting over here.

Looks good.

Do you still have the old set of 17" wheels?

G-Force installed the rear, roll bar and painted the underside.

A friend and I are responsible for the front suspension fab.

My dad and I painted the firewall and subframe in my garage.

Thanks Wayne!

They were sold a while ago. I still need to order the new fronts, but that isn't top priority at the moment.

Some random pics from the recent reassembly process.

Motor/trans dropped in

https://lh3.googleusercontent.com/-D...-51-37_364.jpg

Lug nut selection... You guys feel free to comment on which you'd prefer as I would love your input. The hub pad on the wheels is rather thick. The lug nut on the right is longer than a standard open ended unit. The one on the left is an off the shelf piece from race shop.

https://lh4.googleusercontent.com/-Q...0/DSC_3491.JPG

Custom bracket made to hold prop valve and clutch reservoir

https://lh4.googleusercontent.com/-G...0/DSC_4309.JPG

Prop valve and front brakes plumbed

https://lh4.googleusercontent.com/-U...-07-21_651.jpg

Battery Mount installed

https://lh3.googleusercontent.com/-M...0/P7030026.JPG

One rear tire sitting next to tires for my Subaru

https://lh5.googleusercontent.com/-l...2-14-43_15.jpg


Tire fitment tool for determining proper offset for rears

https://lh4.googleusercontent.com/-f...0/DSC_6407.JPG

Wheels mounted!!!

https://lh6.googleusercontent.com/-l...-53-20_500.jpg

Those wheels and tires look sweet!

Thanks! For now, I am sticking with the vintage SCCA Trans Am theme. May end up with track rubber later on and if that is the case, I am getting something light. However, I will still keep the Minilite reps for the street.

Ok, almost to the end of the most current pics.

Here are the wheels mounted. The back of the car is overexposed in some of these to attempt to expose the wheels (needed another flash :( ).

https://lh6.googleusercontent.com/-k...0/DSC_7109.JPG

https://lh4.googleusercontent.com/-K...0/DSC_7128.JPG

https://lh6.googleusercontent.com/-C...0/DSC_7115.JPG

It is funny, with no contrast in this pic, the 335's look kinda narrow.

https://lh4.googleusercontent.com/-q...0/DSC_7120.JPG

https://lh6.googleusercontent.com/-f...0/DSC_7127.JPG

More random pics

G Braces mocked up and mounting holes drilled

https://lh5.googleusercontent.com/-M...0/DSC_6446.JPG

Anvil deep inner fenders

https://lh3.googleusercontent.com/-l...210_181442.jpg

You can see the ceramic coated stainless works headers in these pics too

https://lh4.googleusercontent.com/-P...218_182348.jpg

https://lh4.googleusercontent.com/-J...218_182335.jpg

Couple pre incident pics...

Day the car came home from the previous (and original) owner

https://lh5.googleusercontent.com/-C...0/P1010014.JPG

Just before the all of the bad stuff happened to the car

https://lh3.googleusercontent.com/-l...0/DSC_9726.JPG

https://lh5.googleusercontent.com/-Y...0/DSC_8915.JPG

Couple more random shots as I browse through my Picasa

Rear brake line fab

https://lh6.googleusercontent.com/-o...9_9A404688.jpg

https://lh4.googleusercontent.com/-k...7_51AB5D6E.jpg