Nice:thumbsup:

Wow!!!!!!!:faint: :faint:

jydracing 63 Split Window
 

Vince, No It is not a Mock frame but it does have a lot of Scott's (VRP) innovation's built it to it. I have known Scott for over 30 years and he has help me build several projects. From a 2000 F-450 make over, a 48 foot gooseneck trailer, 190 inch front engine dragster, he has helped me out a lot. I have seen the cars he has built, and the one he helped his son Kevin build,,,,they are all fast.....and on a budget.....Hoping some of that VRP
magic, safety and engineering rubs off on this build, I know Scott at VRP will not steer me wrong!!!!

This was not a paid advertisement.!!!!!!!!!!:) :)

jydracing 63 Split Window Corvette
 

Spent today setting the body on the frame to see if my frame design will fit the body,,,or vise versa..... I think I got lucky!!!!!!

jydracing 63 split window
 

I decided to add a little more horse power to my project. I purchased a Harrop HH122 supercharger. It supercharger was set up for LS-6, so I decided to change it over to work on a LS-3. I also decided to update the supercharger while I had it apart.Attachment 49379

Attachment 49380

Attachment 49381

Attachment 49382

That's going to be a lot of fun!

jydracing 63 split window
 

Had to take the supercharger apart, 1. separated the blower for the manifold, 2. take out the cooling radiators to clean and install new fittings, 3. Take all parts off of the superchargers, and replace, 4. take rotors out, check for damage, (none), 5. check for clearance, new bearings, put back together, check clearances again, 6. replace all external bearings, 7. replace all O-rings and seals, 8, put blower and manifold, (the new LS-3 manifold), back together,,,,,done

nice build,these cars look great as pro-touring cars:thumbsup:

jydracing 63 split window
 

Thank you