Lateral-g Forums - good drop spindle recommendations?

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - good drop spindle recommendations? (https://www.lateral-g.net/forums/showthread.php?t=46464)

31069ss

06-11-2014 03:52 PM

Quote:

Originally Posted by Vince@MSperfab (Post 555588)

They are a bit smaller, about 6lbs lighter and fit all the headers we have used.

Available from
DSE http://www.detroitspeed.com/Steering...ring-gear.html
Global West part number ST-42 via Summit Racing http://www.summitracing.com/parts/gls-st42

Keith over at Custom Works http://www.customworksperformance.net/suspension.html

Are these the same boxes that speed tech also sells ? And i will be using hooker super comp headers ..... You think i will have clearance issues

Vince@Meanstreets

06-11-2014 11:25 PM

Quote:

Originally Posted by 31069ss (Post 555628)

Are these the same boxes that speed tech also sells ? And i will be using hooker super comp headers ..... You think i will have clearance issues

The ones that were available from ATS/SpeedTech were tuned by Lee steering. These are out of the box Delphi units. They work good.

mdprovee

06-12-2014 12:45 PM

Just a note......If you are using Hooker Super Comp headers, they will not work with the True Turn system.....Dynatech headers fit the True Turn System.

Blake Foster

06-13-2014 09:37 AM

ok now I'm lost you said at the beginning you were using a Rack but then we got onto steering boxes?

Vince@Meanstreets

06-13-2014 10:35 AM

Quote:

Originally Posted by Blake Foster (Post 555888)

ok now I'm lost you said at the beginning you were using a Rack but then we got onto steering boxes?

I turned him around and told him it wasn't necessary and recommended a 600 Delphi.

Vince@Meanstreets

06-13-2014 10:37 AM

Quote:

Originally Posted by mdprovee (Post 555800)

Just a note......If you are using Hooker Super Comp headers, they will not work with the True Turn system.....Dynatech headers fit the True Turn System.

Thanks Mike, I can't believe I forgot about that little item.

All times are GMT -7. The time now is 05:11 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page