Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Wheels and Tires (https://www.lateral-g.net/forums/forumdisplay.php?f=53)
-   -   Baer Pro+ / 6P Caliper brake pad 'noise' question (https://www.lateral-g.net/forums/showthread.php?t=47667)

Vince@Meanstreets 10-22-2014 11:45 PM
Quote:
Originally Posted by carbuff (Post 576672)
I did not. I assume you are suggestion that I whack the tire with a dead blow hammer and see if I get some kind of similar sound? And perhaps a stupid question, but are you suggesting I hit the sidewall or the flat of the tread? I haven't heard of doing this before... :headscratch:
either way....see if something happens?

also check your parking brake bracket to axle flange bolts

carbuff 10-27-2014 03:34 PM
So I lifted the rear of the car last weekend and beat on the tires. And beat. And beat... I rotated them and beat some more. I never heard anything that resembled my clunking type noise. I didn't have time to swap back the original Baer pads, but that is next on my list of things to try.

Vince@Meanstreets 10-27-2014 06:30 PM
Quote:
Originally Posted by carbuff (Post 577510)
So I lifted the rear of the car last weekend and beat on the tires. And beat. And beat... I rotated them and beat some more. I never heard anything that resembled my clunking type noise. I didn't have time to swap back the original Baer pads, but that is next on my list of things to try.
don't forget to do a nut and bolt for good measure.


All times are GMT -5. The time now is 05:14 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net