Awesome job!
 

Can't imagine how fun that's going to be with the T56 and the Maggie on it

We are excited to get it on the track :)

Getting ready to set the engine in place using our LSX motor mounts P/N 4008.

Passenger side frame. The frame is notched for low mounted AC, the motor mount plate is then contoured to clear this notch if the customers frame has it.

http://www.umiperformance.com/pictur...15/0120151.jpg

Drivers side frame mount.

http://www.umiperformance.com/pictur...15/0120152.jpg

Passenger side engine mount. Slots allow the engine to move forward a 1/4" and rearward 3/4"

http://www.umiperformance.com/pictur...15/0120154.jpg

Driver side engine mount. Slots allow the engine to move forward a 1/4" and rearward 3/4"

http://www.umiperformance.com/pictur...15/0120155.jpg

Delphi steering box installed.

http://www.umiperformance.com/pictur...15/0120153.jpg

Wait. Who is gonna be driving :peepwall:


haha, looks great Ryan :thumbsup:

We might stick Sam in this one a few times :thumbsup:

McLeod RST twin disc clutch going on along with the transmission.

http://www.umiperformance.com/pictur...15/0121151.jpg

http://www.umiperformance.com/pictur...15/0121152.jpg

Reinstalling the engine we ran into a small issue. The alternator hits the steering box. We are looking at a bracket to relocate the alternator up to the top and we are hoping the hood allows clearance for this.



http://www.umiperformance.com/pictur...15/0121153.jpg

http://www.umiperformance.com/pictur...15/0121154.jpg

Quick update today. Our new wiring harness came in from M&H Electric Fabricators. This is the original Pontiac engine harness. The harness is put together very well and it will replace the original we no longer have.

http://www.umiperformance.com/pictur...15/0126151.jpg

REALLY like the mounts. Where can I find pricing?

Scott, We have been having great luck and feedback on the mounts. Below is some information on them, please let me know if you have any questions.

UMI P/N 4008- 68-72 A-Body LSX Motor Mounts

Thanks!
Ryan

The Holley alternator relocation bracket and spacer kit is in along with the power steering reservoir, C5 power steering pump will be coming soon. We also got the LeMans back on the lift to install the fuel system and finish the design of our T56 crossmember.

http://www.umiperformance.com/pictur...15/0204151.jpg

http://www.umiperformance.com/pictur...15/0204152.jpg