Lateral-g Forums - Air intake

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)

- - Air intake (https://www.lateral-g.net/forums/showthread.php?t=50366)

waynieZ

06-23-2015 10:04 PM

I think XRP carries something like the smooth hose, but not sure if that's it.

rallystyle

06-25-2015 09:12 PM

Swain any idea when they are going to release the kits again? i am about to get my car started and need a intake now. also are they not doing the heat shield anymore?

DKz Garage

06-26-2015 10:15 AM

Thanks for the suggestions guys.... I ended up piecing together a system from Spectre Performance. Aluminum 4" tubes and couplers, etc...

Vega$69

06-26-2015 11:20 AM

Quote:

Originally Posted by rallystyle (Post 609668)

Swain any idea when they are going to release the kits again? i am about to get my car started and need a intake now. also are they not doing the heat shield anymore?

The 4" tube support they sell is great as well.

I had the whole kit on my last build and the shield would not work well with my aftermarket sub frame.

If you run the filter up behind the headlight with the 90* tube you do not need the shield.

Number1

10-26-2015 12:34 PM

Quote:

Originally Posted by SlowProgress (Post 609445)

I am trying to figure out which hose system that Mark used in plumbing up the tank on Mayhem? It looks like a quality product and I want the black hose and fittings. I snooped around but could not figure it out. Anyone know for sure? There are a lot of choices out there now !

http://i439.photobucket.com/albums/q...I/DSCN0015.jpg

I believe those are tech afx hoses.

marathonboats

01-30-2016 11:36 PM

I agree with Built my own custom closeout / air box on the Pass side, and the entire filter is inside the fender

All times are GMT -7. The time now is 12:05 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page