Lateral-g Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Update on Stielow's Camaro X (https://www.lateral-g.net/forums/showthread.php?t=5040)

Datsbad 06-27-2006 09:59 AM
Quote:
Originally Posted by Teetoe_Jones
Technically, it only has DSE upper/lower control arms on the front which have little effect on the overall front geometry. The upper control arms retain the factory mounting locations, and it is topped off by AFX spindles, Bilstien coil overs, and (soon to come) ATS splined sway bar.
The LS7 install is very well done, should be a killer article.

Tyler
my point was that i was surprised not to see some high dollar front subrame and the same for the rear . I was referring this info from what Mark told me on the powertour. Sorry if i was wrong

Teetoe_Jones 06-27-2006 01:43 PM
I honestly think he would have run the new DSE frame if it was released in time.

Tyler

Datsbad 06-27-2006 07:51 PM
Tyler , that clutch works PERFECT !! Thanks again

Teetoe_Jones 06-27-2006 07:53 PM
;)

McLeod rules.

Tyler

Steve1968LS2 06-27-2006 07:58 PM
Quote:
Originally Posted by Teetoe_Jones
;)

McLeod rules.

Tyler
Why yes they do.. and I can walk there for parts.. lol

McssGmachine 06-27-2006 10:33 PM
Is he taking it to Woodward?

ohcbird 06-27-2006 10:42 PM
Tyler-
Did you guys do the rear sway bar for that, or is this another DSE surprise?

tracy 06-28-2006 08:28 AM
Quote:
Originally Posted by ohcbird
Tyler-
Did you guys do the rear sway bar for that, or is this another DSE surprise?
Yes, inquiring minds want to know!!

Teetoe_Jones 06-28-2006 08:41 AM
We had nothing to do with the rear suspension. We did the LSX engine mounts, the LS7 dry sump oil pan, our tri-y stainless headers, our T56 install kit, and our AFX spindles. We will be supplying our Spline-Tune rate adjustable sway bar after we finalize the arms.

Tyler

Jr 06-28-2006 09:44 AM
HOT DAMN!

I can't wait to see this at sema...

Tyler,
thanks for the info


All times are GMT -7. The time now is 05:33 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net