Lateral-g Forums
Page 2 of 5 1 2 34 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project 66 Chevelle (https://www.lateral-g.net/forums/showthread.php?t=52516)

pro66tour 03-21-2016 06:17 PM
Quote:
Originally Posted by class67 (Post 633068)
I went with Scott's Hot Rods out of SoCal. I met with him this past weekend at the Good Guys show and went ahead and ordered it. They do nice work, fully tig welded 2x4 framing, complete with suspension (Ridetech coilovers all around) 14" Wilwood drilled and slotted, 6 piston calipers, fuel and brake lines plumbed, fuel tank, splined sway bars front and rear, power rack and pinion, Moser 9" rear with 3.70 gears...the whole thing!!!
You are set brother! Wow...
Nothing like face to face at a good guys event. I know that first hand. Well done Steve!

Centerforce 03-21-2016 06:21 PM
Sub'd for the action. Sounds like the chassis you got is fully hooked up with some quality parts!

class67 03-22-2016 04:57 PM
Thanks!

Zoomin 03-22-2016 06:00 PM
Good luck!

This'll be a fun one to watch. What's the motorvation plans?

class67 03-22-2016 06:01 PM
Quote:
Originally Posted by Zoomin (Post 633183)
Good luck!

This'll be a fun one to watch. What's the motorvation plans?
525hp LS3 and still undecided on the trans right now...

torino420 03-23-2016 08:54 AM
Funny, I thought the garage looked very familiar (seeing the bricks on the outside) and noticed where you're from. Howdy neighbor.

I've always liked the 66's, looking forward to your progress.

crestronwizard 03-23-2016 10:01 AM
Quote:
Originally Posted by class67 (Post 633068)
I went with Scott's Hot Rods out of SoCal. I met with him this past weekend at the Good Guys show and went ahead and ordered it. They do nice work, fully tig welded 2x4 framing, complete with suspension (Ridetech coilovers all around) 14" Wilwood drilled and slotted, 6 piston calipers, fuel and brake lines plumbed, fuel tank, splined sway bars front and rear, power rack and pinion, Moser 9" rear with 3.70 gears...the whole thing!!!
Sounds awesome. Out of curiosity, what was the biggest deciding factor versus an AME chassis?

class67 03-23-2016 05:54 PM
Quote:
Originally Posted by crestronwizard (Post 633260)
Sounds awesome. Out of curiosity, what was the biggest deciding factor versus an AME chassis?
I had the chance to meet face to face and see their product in person at the good guys show this past weekend and I liked what I saw, I guess and they are somewhat local (by that I mean they are in CA.) That and I tend to go against the grain a little too...

class67 03-23-2016 05:55 PM
Quote:
Originally Posted by torino420 (Post 633257)
Funny, I thought the garage looked very familiar (seeing the bricks on the outside) and noticed where you're from. Howdy neighbor.

I've always liked the 66's, looking forward to your progress.
Where are you at in Tracy?

torino420 03-23-2016 06:43 PM
Quote:
Originally Posted by class67 (Post 633299)
Where are you at in Tracy?
South MacArthur


All times are GMT -7. The time now is 09:33 AM.
Page 2 of 5 1 2 34 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net