Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   Ridetech control arms, should this move? (https://www.lateral-g.net/forums/showthread.php?t=52768)

Vince@Meanstreets 04-20-2016 04:11 PM
Quote:
Originally Posted by cpd004 (Post 635858)
Got ya. Thanks so much for the help! This is definitely new territory for me. I'm the guy they should hand the whole kit too while someone watches and writes instructions. A video wouldn't hurt either.

On another note, is it possible to overtighten the lower bolt that goes through the two spacers at the heim ball? I would guess it wouldn't matter as this shouldn't prevent the ball from moving freely.
no problem, any time.

Minimum torque on a 5/8" bolt is 150 ft lbs min and 180 ft lbs max

Since we are going with a nylock nut I usually so 45-65 ft lbs

JKnight 04-20-2016 05:47 PM
Quote:
Originally Posted by cpd004 (Post 635858)
I'm the guy they should hand the whole kit too while someone watches and writes instructions.
Can I apply for that job? I'm very qualified ;)

Josh@Ridetech 04-28-2016 06:38 AM
Good working with you! :cheers:

cpd004 04-28-2016 01:19 PM
Quote:
Originally Posted by Josh@Ridetech (Post 636478)
Good working with you! :cheers:

Josh, might want to clarify that part in the instructions for future customers.

Josh@Ridetech 04-28-2016 02:31 PM
Quote:
Originally Posted by cpd004 (Post 636505)
Josh, might want to clarify that part in the instructions for future customers.
With these being an old design, they've changed a little bit :D

cpd004 04-28-2016 03:05 PM
Quote:
Originally Posted by Josh@Ridetech (Post 636513)
With these being an old design, they've changed a little bit :D
The arms are an old design?

Josh@Ridetech 04-29-2016 06:33 AM
Quote:
Originally Posted by cpd004 (Post 636515)
The arms are an old design?
For some reason, I was thinking your car was a 1st Gen until I looked at your signature. That is still the current design for the 2nd Gen. I'll see if I can do anything with the instructions.


All times are GMT -7. The time now is 11:29 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net