Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   1969 Camaro Part Deaux (https://www.lateral-g.net/forums/showthread.php?t=53229)

Zoomin 07-12-2016 08:37 PM

Got the tubs in place

http://i858.photobucket.com/albums/a...5F6BB23D77.jpg

And with that done, we put the wheels in place so we could measure for the Quick Performance 9" rear. Got that order in, should have it next week.

http://i858.photobucket.com/albums/a...FF59010E0B.jpg

http://i858.photobucket.com/albums/a...67DD69A7EE.jpg

JKnight 07-12-2016 10:50 PM

Looks fantastic! Nice job on the tubs and wheel selection.

slenning 07-13-2016 06:56 AM

Nice work so far! :thumbsup: Love those wheels!!

FaBrycation 07-13-2016 07:01 AM

Nice work!

Zoomin 07-13-2016 08:52 PM

Quote:

Originally Posted by JKnight (Post 641111)
Looks fantastic! Nice job on the tubs and wheel selection.

Quote:

Originally Posted by slenning (Post 641129)
Nice work so far! :thumbsup: Love those wheels!!

Quote:

Originally Posted by FaBrycation (Post 641131)
Nice work!



Just another Camaro, but hey it's mine! Thanks for chiming in.

tubbed69 07-13-2016 09:52 PM

very nice work,really like the car:thumbsup: :thumbsup:

Zoomin 07-14-2016 05:57 PM

Quote:

Originally Posted by tubbed69 (Post 641218)
very nice work,really like the car:thumbsup: :thumbsup:

Thanks Jeff, if it turns out half as good as yours, I'll be thrilled!

Today Kyle's turned his attention to the front end. The front fender is off to have the paint repaired which makes this the perfect time to pull the suspension and engine. The engine is going to be repainted and the RideTech TruTurn system installed.


http://i858.photobucket.com/albums/a...048132C1_1.jpg


The brake booster and master are going to be replaced with a manual Wilwood unit.
http://i858.photobucket.com/albums/a...412CF066_1.jpg

http://i858.photobucket.com/albums/a...BFBB5C4166.jpg


Coil overs, Strong Arms, drop spindles installed.
http://i858.photobucket.com/albums/a...056B7333A1.jpg

http://i858.photobucket.com/albums/a...960F69C9B6.jpg

http://i858.photobucket.com/albums/a...86BEA5D9F8.jpg

Zoomin 07-16-2016 08:42 PM

Here's a look at the brains of the TruTurn setup. The center link gets a brace that relocates the tie rods to eliminate bump steer, in conjunction with special steering arms and taller spindles. Really nice pieces.

http://i858.photobucket.com/albums/a...54DA201B47.jpg

http://i858.photobucket.com/albums/a...03F8A5C628.jpg


Here's a look at the side with the fender still on it. This isn't ride height, the lift won't go any lower.


http://i858.photobucket.com/albums/a...42FCADED_1.jpg

http://i858.photobucket.com/albums/a...EC58E0CB6C.jpg

califconstruct 07-17-2016 09:18 AM

.
Good stuff on that tubbing, car is looking good!

.

Zoomin 07-17-2016 07:26 PM

Quote:

Originally Posted by califconstruct (Post 641394)
.
Good stuff on that tubbing, car is looking good!

.

Thanks Art!

I read through Joan's build thread and I gotta hand it to you - you've got major determination.


All times are GMT -7. The time now is 04:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net