Lateral-g Forums - Dimple Dies, Punch & Bead, firewall, and engine bays

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Shop & Equipment (https://www.lateral-g.net/forums/forumdisplay.php?f=56)

- - Dimple Dies, Punch & Bead, firewall, and engine bays (https://www.lateral-g.net/forums/showthread.php?t=53529)

Ketzer

07-04-2018 04:00 PM

I bought my dies from here....

http://www.swagoffroad.com/SWAG-Dimp...-Set_c_56.html

Also lots of related tools and parts.

Jeff-

jarhead

07-04-2018 07:30 PM

Quote:

Originally Posted by Ketzer (Post 679631)

I bought my dies from here....

http://www.swagoffroad.com/SWAG-Dimp...-Set_c_56.html

Also lots of related tools and parts.

Jeff-

Thanks Jeff,
I just bought the SWAG porter cable bandsaw stand a couple of months ago, it' a hight quality piece .

I'll take a look at those.

Joe

Ketzer

07-05-2018 04:11 PM

Quote:

Originally Posted by jarhead (Post 679637)

Thanks Jeff,
I just bought the SWAG porter cable bandsaw stand a couple of months ago, it' a hight quality piece .

I'll take a look at those.

Joe

Be sure you pay attention to the dimple shape. The SWAG versions are different than most rounded dies. I use mine more for steel than aluminum. The rounded versions listed elsewhere in this thread are not really for steel and bind together on thicker materiel (according to the guy that makes them)...

All times are GMT -7. The time now is 02:45 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page