Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Speedtech Performance USA (https://www.lateral-g.net/forums/forumdisplay.php?f=90)
-   -   A Subframe to Out Do Them All! (https://www.lateral-g.net/forums/showthread.php?t=55107)

cpd004 09-10-2017 08:37 AM
With Wilwood Corvette brakes up front, will any C5 or C6 wheel offered on a Corvette bolt up front to use as a temporary roller? I think the smallest offering in a C5 was 17x9.5.

Blake Foster 09-11-2017 08:55 AM
Quote:
Originally Posted by cpd004 (Post 665423)
With Wilwood Corvette brakes up front, will any C5 or C6 wheel offered on a Corvette bolt up front to use as a temporary roller? I think the smallest offering in a C5 was 17x9.5.
the Corvette wheel will probably not fit with wilwood calipers you can down load the caliper template on the Wilwood site an check it to the wheel in question.
keep in mind you can always just not install the calipers until your ready to put the final wheels on.

cpd004 09-11-2017 05:07 PM
Quote:
Originally Posted by Blake Foster (Post 665476)
the Corvette wheel will probably not fit with wilwood calipers you can down load the caliper template on the Wilwood site an check it to the wheel in question.
keep in mind you can always just not install the calipers until your ready to put the final wheels on.

Perfect! Thanks!


All times are GMT -7. The time now is 06:10 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net