Lateral-g Forums - New project intro "Project Aftermath" (69 Camaro SS)

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - New project intro "Project Aftermath" (69 Camaro SS) (https://www.lateral-g.net/forums/showthread.php?t=5602)

Wow not to sure I'll ever do this again, turned out mroe work that I thought it would be , but damn it looks good.

We got the idea from DSE site to weld in plates to smooth out the factory subframe seams. We started be grinding all the old factory bubble gum splattered crap out and completly TIG welding the entire seam top and bottom. Then went back and cut plates to fill the gaps where the seam rolls over. After all them were cut we proceed to do some hammering and shaping to follow the contours of the rails. Tacked them in , shaped a little more, and then proceed to complety TIG them in. Then came the fun part, couple hours grinding, and 5 or so flap discs later. It smooth and shiny again!! As far as it'll go for now until after we get done with mockup, and then we'll lead some pinholes and powdercoat it.

Here's the pics

My right hand man Jerry!!

http://www.fletcherscustoms.com/proj...0375.sized.jpg

http://www.fletcherscustoms.com/proj...0376.sized.jpg
http://www.fletcherscustoms.com/proj...0377.sized.jpg
http://www.fletcherscustoms.com/proj...0378.sized.jpg

Here are some more pics for you guys of the pretty 402 LS2 built by our fellow member on here Dave Diluca(SLED28)

Motor:
-402 cid
-LS2 6.0L aluminum block
-Eagle 4340 crank
-Lunati billiet rods
-Wiseco pistons
-AFR CNC 225cc heads
-Harrop Hurricane intake
-ARP main studs
-ARP head bolts
-Custom Comp cam
-Morel lifters
-Double roller chain
-Ported oil pump
-ATS oil pan
-Sheetmetal valve covers
Reply With Quote

http://webhome.idirect.com/%7Eykwdxd...S2%20Block.JPG
http://webhome.idirect.com/%7Eykwdxd...longblock1.JPG
http://webhome.idirect.com/%7Eykwdxd...ng/pistons.JPG
http://webhome.idirect.com/%7Eykwdxd...odspistons.JPG

Quote:

Originally Posted by boilermaker

Here's a quick photoshop done to "shop beater" To show the look I am going for with "Project Aftermath"

Man that is going to be a SWEET LOOKING ride!!!! :thumbsup: :hail: :hail: :eek:

Hot damn got some round things in for the car! These are Intro Wheels new 3 peice design, ID Luxury 307 series. 18x8 fronts and 20x12 rears. Plans are 245/40 front and 335/30 rear Michelin PS2's

http://www.fletcherscustoms.com/proj..._001.sized.jpg
http://www.fletcherscustoms.com/proj...0392.sized.jpg
http://www.fletcherscustoms.com/proj...0393.sized.jpg

How many of those Ben Franklin measuring tapes did those rims cost? :unibrow: (no real need to answer, just needed to comment on the Benjamins) They look great!

Those wheels look pretty cool. With the out hoop beeing black, I'll be interesting in seeing them mounted up and on the car.

i like the sweet layd out trucks in the back too...i also own a 95 ram body drop back half the whole 9 on it and a 69

OMG this thing is looking awesome :hail: