Lateral-g Forums - Mann Hummel advice sought

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Mann Hummel advice sought (https://www.lateral-g.net/forums/showthread.php?t=58227)

jarhead

01-15-2020 08:08 AM

Quote:

Originally Posted by Whitepark (Post 699807)

Thanks. We were working on an OEM look under the hood.

That air cleaner is over the top cool!

NOT A TA

01-15-2020 06:24 PM

Just here to say, AWESOME ENGINE BAY !!!!!

Whitepark

01-15-2020 11:47 PM

Quote:

Originally Posted by NOT A TA (Post 699857)

Just here to say, AWESOME ENGINE BAY !!!!!

Thank you

Whitepark

01-15-2020 11:47 PM

Quote:

Originally Posted by jarhead (Post 699838)

That air cleaner is over the top cool!

Thanks, I really like it too.

colorado80439

01-16-2020 06:42 AM

Quote:

Originally Posted by CarlC (Post 699775)

The MH part, like the Provent 200, is meant to be used in-line with a PCV valve. Basically...

Drivers valve cover -- PCV--MH-- throttle body vacuum source.

Vacuum is needed for the drainback valve to actuate.

Just looking at the Godfathers last post and didn't see mention of a PCV in the system?

Whitepark

01-16-2020 09:49 AM

1 Attachment(s)

Quote:

Originally Posted by colorado80439 (Post 699868)

Just looking at the Godfathers last post and didn't see mention of a PCV in the system?

I'm still working on location of the PCV. A traditional PCV in the valve cover is problematic because the (fake) valve covers are closed and non functioning - they sit on top of this spacer on the cylinder heads that mounts the coils, and do not offer direct access to engine breathing.

All times are GMT -7. The time now is 02:43 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page