Lateral-g Forums - Angry Johnny's 69 Camaro Build

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Angry Johnny's 69 Camaro Build (https://www.lateral-g.net/forums/showthread.php?t=58280)

Smoothed Firewall

This was the last major thing I did before I moved to a new house, other than bolting on the suspension to allow me to move the car.

Fully smoothed out firewall. I was just going to weld everything up, but decided this would be easier. Now I need to figure out my hole for the steering column :popcorn2:

Simple as drilling out the spot welds, straightening out the trans tunnel flange a bit, then test fitting a flat piece of sheet metal in place.

https://i.imgur.com/YHWtuQs.jpg

https://i.imgur.com/YA71jyC.jpg

https://i.imgur.com/m5DNhPL.jpg

https://i.imgur.com/P4KyASz.jpg

https://i.imgur.com/ymXnOmT.jpg

https://i.imgur.com/Nw0f3hY.jpg

https://i.imgur.com/07CMcz5.jpg

https://i.imgur.com/732BEeU.jpg

https://i.imgur.com/9iTM8u8.jpg

https://i.imgur.com/AmwVRAO.jpg

https://i.imgur.com/kTQzwd1.jpg

https://i.imgur.com/7uBqvhP.jpg

https://i.imgur.com/l6I315V.jpg

Quote:

Originally Posted by Rodknock (Post 700362)

Thanks Chris!! I managed to get a little body work done on it today.

Jim, thanks for the warm welcome. I joined a while ago, just never eally posted much.
I have an iron block 6.0L here and a 4WD 4L80e, that I need to make RWD.
The color is going to be House of Kolor Lime Mist. I will post pics of it when I get a chance.

Red Wing steel works, I think it was.

same plans, it is a great rotisserie.

Lime Mist is a great color choice! Welcome to the site and thanks for sharing your project.

Nice!! John you're not messing around. Going to be a fun build to watch. Looking forward to seeing more.

:thumbsup::thumbsup:

Quote:

Originally Posted by Spiffav8 (Post 700402)

Nice!! John you're not messing around. Going to be a fun build to watch. Looking forward to seeing more.

:thumbsup::thumbsup:

Thanks!! I'm not too far from you. Just over in Golden Valley AZ, by Kingman.

Quote:

Originally Posted by Goosesdad (Post 700436)

Looks great!

Thank you!!:thankyou:

Looks great! Wanna come to Phx and help me do another trunk pan? Just kidding...kinda...

Heidts Pro G subframe assy

Rear Heidts suspension

Well, now things slow down, due to a move from the little house we were in with a 1 1/4 car garage, to a house we bought with a 30 x 45 pole barn building :D Only thing is, I stopped progress on the car to try to re-do the shop, and basically wasted time and money, I could have put towards the car :/

You can see a little of the shop in the background

https://i.imgur.com/LiFkVYN.jpg

Poor car, just siting there all neglected and stuff :(

https://i.imgur.com/IQ7DLlJ.jpg

I had big plans for this shop. Office, spray booth, insulated, heated. Almost got it finished, when we ended up moving south from Wyoming to AZ.

https://i.imgur.com/vfQYtey.jpg

https://i.imgur.com/gEJZwYH.jpg

https://i.imgur.com/JvNgam4.jpg

https://i.imgur.com/f3USZ8z.jpg

https://i.imgur.com/6tzV50S.jpg

https://i.imgur.com/NjxFpmd.jpg

https://i.imgur.com/JoFcyAF.jpg

https://i.imgur.com/ljY3cCt.jpg

https://i.imgur.com/Vj6StP3.jpg

https://i.imgur.com/nFvhG2A.jpg