Lateral-g Forums - LSA PCV Options / Routing

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - LSA PCV Options / Routing (https://www.lateral-g.net/forums/showthread.php?t=58451)

nicks67ca

05-07-2020 05:27 AM

Thanks Don, i found a video on it. It looks really nice. The valley / snout routing was the same as as most. On the install they used 2 ports in the intake tube. they used the OEM and added one for the can. Did you do the same?

nicks67ca

05-07-2020 05:29 AM

Quote:

Originally Posted by randy (Post 703236)

None. I spent weeks thinking about this setup and finally went this route. I couldn’t be anymore happy.

Thanks Randy, I have an email into MM on a quote. Did you buy the PCV can?
https://www.mightymousesolutions.com...t-page/pcv-can

dhutton

05-07-2020 02:03 PM

Quote:

Originally Posted by nicks67ca (Post 703244)

Pretty sure I only have one port on the intake tube. I hooked it up a few years ago.

Don

randy

05-07-2020 07:11 PM

This is the one that I got. Once you see it it will then make sense on why it cost so much.

https://www.mightymousesolutions.com...ge/cts-v2-mild

nicks67ca

05-08-2020 04:48 AM

Thanks Guys, I ended up emailing MM for a recommendation and this is what i ended up with. I think this is the same can as Randy referenced just listed differently.

https://www.mightymousesolutions.com...t-page/pcv-can

All times are GMT -7. The time now is 04:32 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page