Lateral-g Forums - Ross' 482 ZL-1 update pics

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Ross' 482 ZL-1 update pics (https://www.lateral-g.net/forums/showthread.php?t=591)

camcojb

03-13-2005 08:25 PM

Quote:

Originally Posted by BillyBobL71

That is going to be one good looking hunk of aluminum. What did you use for a rotating assembly?

Billy Bob

Scat crank and rods and Diamond custom pistons.

Jody

Blown353

03-14-2005 06:21 PM

Jody, what happened with the GM heads? I thought one of Ross's goal was to "Keep his GM car all GM."

Then again the AFR's are a HUGE step up in terms of flow. :thumbsup:

camcojb

03-14-2005 06:25 PM

Quote:

Originally Posted by Blown353

Jody, what happened with the GM heads? I thought one of Ross's goal was to "Keep his GM car all GM."

Then again the AFR's are a HUGE step up in terms of flow. :thumbsup:

Probably 75-100 HP above what he had. The GM (Edelbrock) heads have a funky chamber shape and many pistons don't fit. His would have required major work to make them fit, so he and I talked and thankfully he ended up selling the GM heads and buying AFR's.

Jody

hapevo

03-15-2005 05:12 PM

thanks Jody!

It is sure nice to see some real progress on the ZL-1! It has been pretty crazy I must say with all of the "problems" that have reared their ugly heads :eek: . And major thanks to Jody for putting up with me and that big pile of aluminum! :hail:

Ross

camcojb

03-15-2005 05:15 PM

Quote:

Originally Posted by hapevo

We'll see if you still like me when you get the bill! :eek:

Jody

907rs

03-15-2005 05:29 PM

Welcome back Ross. :thumbsup:

hapevo

03-15-2005 06:00 PM

Jody - I knew that was coming! :willy:

Bill - Finally found a minute to actually type a few words instead of lurking around. :thumbsup:

All times are GMT -7. The time now is 08:19 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page