Lateral-g Forums - Who makes this?

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)

- - Who makes this? (https://www.lateral-g.net/forums/showthread.php?t=6318)

Mike Hall

10-14-2006 11:17 AM

Well I cant find anyone with 16 gauge steel thats open today. HomeDepot has it but its like $25 for a 1x2ft section which im not going to pay.

I guess I will work on getting the inner tubs totaly removed so I will be ready for my mini tubs.

Mike

comp-spec

10-14-2006 05:50 PM

Quote:

Originally Posted by Mike Hall

Do you have a cable setup or something for the wipers? I was thinking about going to the junk yard ad looking around until I found something that looked like it would fit inside the cowl. Any chance you have pictures of how you did your wipers?

Thanks
Mike

we used a stock wiper motor and modified the arms in the cowl
http://www.competition-specialties.com/camaro1.htm

awr68

10-14-2006 10:14 PM

I remember reading somewhere that a guy used a VW wiper motor because it fit in the cowl area...perhaps a quick google would find it?

Overkill

10-16-2006 07:15 AM

My VW Wiper install

Quote:

Originally Posted by awr68

I remember reading somewhere that a guy used a VW wiper motor because it fit in the cowl area...perhaps a quick google would find it?

I used a VW wiper motor in my '69 Camaro based off of paul67's (over at pro-touring.com) original design. I have some pictures of my install over on my website if you are interested. http://www.camaroheaven.org/modules....howpage&cid=36

Here's on of the installed pictures:
http://www.camaroheaven.org/images/a...y_wiper009.jpg

You can ignore all the pictures of the Camaro wiper switch modifications, I ended up not going that route, but I left the pictures up just in case someone was interested in seeing what the inside of the switch looked like.

Steve1968LS2

10-16-2006 08:42 AM

Quote:

Originally Posted by Mike Hall

That's what I just did. Well I made a pattern. I need to find some steel sheet big enough to cut this thing out. Im not sure If I will leave the wiper hole or not as I would like to come up with something that can mount in the cowl to operate the wipers.

Mike

That's what we did.. covered the whole darn thing :)

Mike Hall

10-16-2006 11:18 AM

Thanks for the info Overkill. That will be very helpful when I get to the wipers.

Thanks
Mike

bigtyme1

10-20-2006 08:49 PM

Try mikes custom cars, I got my panels from him, fit great complete side to side all the way to the top.
:thumbsup:
http://www.mikescustomcars.com/index.html

All times are GMT -5. The time now is 03:54 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page