Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)
-   -   Difference in fuel injectors? (https://www.lateral-g.net/forums/showthread.php?t=7531)

camcojb 01-26-2007 06:33 PM
Quote:
Originally Posted by 69 L88 Camaro
Because I didn't know any better. Thanks for the update. I'll have to brush up on my information. Got any websites? God I love the internet.
Kevin
RC Engineering goes up to 75# at 43 psi in high impedance.

http://www.rceng.com/

Jody

69 L88 Camaro 01-26-2007 06:50 PM
Quote:
Originally Posted by camcojb
RC Engineering goes up to 75# at 43 psi in high impedance.

http://www.rceng.com/

Jody
Thanks alot for the site Jody! RC engineering didn't ring a bell until I saw the home page. I used to think Russ was even badder than E.J. Potter. Glad to see he is still around.

Fotoboy 01-28-2007 03:43 PM
Nice injectors from RC, I have the himp 75.

79ZED 02-07-2007 09:20 PM
Venom is another company that comes to mind. They will build high or low Z injectors up to 190lbs/hr.

John

Flash68 02-12-2007 03:22 PM
Quote:
Originally Posted by camcojb
RC Engineering goes up to 75# at 43 psi in high impedance.

http://www.rceng.com/

Jody

Hey Jody, just curious... is RC the maker of the 75# injectors on my 406?

thanks

Blown353 02-12-2007 09:18 PM
Quote:
Originally Posted by Flash68
Hey Jody, just curious... is RC the maker of the 75# injectors on my 406?

thanks
I believe they are-- but Jody can confirm it. I haven't looked at that engine in quite a while but I vaguely remember their label on the injectors. Maybe I'm confusing it with his old 540 though, that thing I'm 99% certain had RCE injectors on it.

Flash68 02-13-2007 12:34 AM
Quote:
Originally Posted by Blown353
I believe they are-- but Jody can confirm it. I haven't looked at that engine in quite a while but I vaguely remember their label on the injectors. Maybe I'm confusing it with his old 540 though, that thing I'm 99% certain had RCE injectors on it.
thanks Blown353... I have checked out your site before and hope to see your car in action someday. Sweet car and motor you have there.

camcojb 02-13-2007 08:04 AM
Quote:
Originally Posted by Flash68
Hey Jody, just curious... is RC the maker of the 75# injectors on my 406?

thanks
pretty sure they are, that's all my efi connection uses and I would have bought them from him. Not cheap, but they're flowed and sold in matched sets, so eliminates a variable out of the tuning process.

Jody

Flash68 02-13-2007 08:01 PM
Quote:
Originally Posted by camcojb
pretty sure they are, that's all my efi connection uses and I would have bought them from him. Not cheap, but they're flowed and sold in matched sets, so eliminates a variable out of the tuning process.

Jody
Cool, thanks Jody.

speedshopmike 02-23-2007 09:44 PM
many other make large high ohm injectors - ford motorsport, msd, accel, etc etc.


All times are GMT -7. The time now is 12:20 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net