Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)
-   -   Fuel pump for 600hp? (https://www.lateral-g.net/forums/showthread.php?t=7698)

ProdigyCustoms 02-08-2007 03:04 AM
We sell a lot of the Rick's tanks with A1000 in them. We run that set up on Project Prodigy.

4mm 02-08-2007 05:42 PM
Quote:
Originally Posted by Ricochet
I just ordered my tank from Ricks and Hector, or should I say I, went back and fourth and which pump set up to go with. I'm running a mild EFI Big Block that is just at the 600 HP mark. The A1000 is to much for me (although with a controller would work fine) then I went back and fourth on the Walboro's or he suggested the Aeromotive 11106 inside the tank.
Brent
How is the noise level with it in the tank? I have heard the A1000 and it was a bit too much for me.

ProdigyCustoms 02-08-2007 06:53 PM
With the top down, when you turn on the key you know it is on. Which I kinda like. Once we fire the car, it is not heard.

ss dave 02-11-2007 01:27 AM
Update on the fuel pump, the Walbro pump is a hi-pressure 255l/hr pump rated conservatively at 640hp NA. This should be adequate for my application, and just as important keep it simple. The Aeromotive A1000 pumps that Rick's also place in their tanks work great for higher HP set-ups, but may require a few more additions such as a BG heat sink.

Bowtieracing 02-11-2007 03:24 AM
Quote:
Originally Posted by ss dave
Update on the fuel pump, the Walbro pump is a hi-pressure 255l/hr pump rated conservatively at 640hp NA. This should be adequate for my application, and just as important keep it simple. The Aeromotive A1000 pumps that Rick's also place in their tanks work great for higher HP set-ups, but may require a few more additions such as a BG heat sink.
Hello Dave! Good update,thanks for the info.

Ricochet 02-12-2007 01:08 PM
Quote:
Originally Posted by 4MuscleMachines
How is the noise level with it in the tank? I have heard the A1000 and it was a bit too much for me.

Don't know at this point. The tank is still being built & at my rate might be in the car this decade!! :D

Brent


All times are GMT -7. The time now is 02:41 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net