Lateral-g Forums - What Would You Pay For This? (not a car)

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - What Would You Pay For This? (not a car) (https://www.lateral-g.net/forums/showthread.php?t=7863)

KAA	01-30-2007 09:10 PM

Quote:

Originally Posted by fesler

The articles are always going to be off a little unless you do what I do when we get an article in the magazine, I have dozens of them and most of them I do myself at Michaels. I have a few from In The News and they are nice but they will fad if you leave them in the sun at all. I go to Michaels and they do a nice job with the cut out and glass work. I will post a picture tomorrow if you are interested in seeing what they look like. They cost about the same or a little less but both are nice.

I hope that helps a little

I'd like to see that pic. Thanks!

slck6t9

01-31-2007 12:54 AM

This is exactly what I was wanting to do with my car in the Dec. issue of PHR. Do you guys know if you have to send them a copy? I am currently in Korea and would have to have the wife do all the dirty work.

KAA	01-31-2007 07:30 AM

Quote:

Originally Posted by slck6t9

Supposedly they have subscriptions to all the major publications but, if they don't have a copy, you can send them one.

cadpro

01-31-2007 06:07 PM

I'm looking at a 2-board spread, with each board having a 2-page car photo, and the car lines are perfect (and this is a on VW Bug, which is very round, which would be very noticeable), but its by a company called Todays People (http://www.todayspeople.com). If memory serves, we'd pay about 200-250 for the 2 boards, so it sounds like your deal would be ok. Ask them if they could try it again to see how it turns out...

On one of mine, it actuall looks like they shifted the page up (by a hair) to get the car lines to line up, but a small border is off very slightly. Its alot less noticeable than if it was the car...

MaxHarvard

02-01-2007 06:00 AM

They called me too!! LOL. My car was only in the hometown hot rodding section! Sheesh.

The guy that called was pretty nice, good to hear that their product is decent.... kinda pricy though.

MaxHarvard

02-01-2007 06:12 AM

i got these frames at Kohls for under $10. Did them myself, not the greatest job in the world... but still looks decent. :)

http://anti-rice.com/me/DSC01534.jpg

All times are GMT -7. The time now is 06:34 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page