Lateral-g Forums - Looking for a good (low cost) tubing bender

Page 2 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Looking for a good (low cost) tubing bender (https://www.lateral-g.net/forums/showthread.php?t=9513)

Fluid Power

05-14-2007 09:21 AM

Bender

garage dog 65 was using a bender from these guys.

http://www.pro-tools.com/200.htm

Darren

coolwelder62

05-14-2007 11:38 AM

tubing bender

Call the guys at pro tools ask for jim he can hook you up. Knows his stuff .

Teetoe_Jones

05-14-2007 12:06 PM

Hey Mike-

Check www.Lowbucktools.com our machinist makes the tube bender and it kicks a lot of ass.

Tyler

Hoot	05-15-2007 03:57 AM

AHHHH... IRVAN, damn lou you need some speach therapy!!! And that was a nice looking protractor! he didn't say what kind it was, but i'm gonna have to check the tape again to see if I can get a better look at it.

B Schein

05-15-2007 06:11 AM

Check out these guys they have everything you need to bend tubing

http://www.vansantent.com/

Garage Dog 65

05-15-2007 06:50 AM

I purchased the Smart Tool digital protractor for/with my Longacre Caster Camber gauge - and a tube mount bend/notch aligner and a mag base for the Smart Tool from VanSant. Protractor can be used in all 3 setups. Works great.

http://vansantent.com/digital_levels.htm

Jim

PS, I bent some 1.5 x .250 tube 90 degrees this weekend in my Pro-Tools bender. 20 tons pushed it right around with no kinks or wrinkles.

rich-allen

05-15-2007 07:47 AM

The protractor looked like a Starrette

All times are GMT -7. The time now is 05:41 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page