I guess I better get on the ball and get some up to date pics and send them in... Still a work in progress.

Definitely. :thumbsup: We have quite a few kick ass projects featured.

projects
 

I am rebuilding the show car I built with the help of my Dad when I was young, and going the "Pro-Touring" route. I have been drag racing for the past few years, just sold my weekend driver that went 9.70's on pump gas and drag radials. My other car is a little Ford Fairlane. It is not as serious as most of the cars featured here, but here are the basics and you can decide if it has "evolved" enough to fit this site.

1964 Ford Fairlane 500
308 inch small block, semi-serious, making 350-375hp
Tremec 3550
8.8 out of a late model Explorer, narrowed, 31 spline, Traction lock, disk brakes, adapting the Pandhard bar and over-ride traction bars if possible, 7/8 sway bar
AeroSpace front discs, different springs/shocks, 1 inch sway bar

Still up in the air on wheels/tires, these cars have very small wheelwells and I don't plan on tubbing the car. I will probably go the route of 275/35/18's on the rear and 245/40/18's on the front. My current pics are of it in the garage with the engine out and an old set of 14 inch steel wheels, but at one point it was a 93 point show car. I am planning on doing Cruising The Coast and part of the Power Tour next year. I just found this site, really like it, but wondered if nice but lower budget cars still fit the mold? Interested in seeing pics, even if the car doesn't make the webpage?

Welcome to the board, Cody.

It sounds like your car fits the mold, as most all of us are building old cars to accelerate, brake, and handle at the level (and beyond) Detroits latest performance offerings.

To have your car featured, send pics and info to Scott at [email protected]

scott, what about this?
 

hey scott

wanted to submit my dads ride......pic attached
..1985 elcamino ss
he has redone everything on the outside from paint to trim to spray in liner.
inside it has 94 camaro buckets....new acc carpet all in grey
1998 s10 ss wheels 245/50/16 tires
he has replaced the the suspension components and added a sway bar in the rear .thanks to me and our junk yard expeditions .and he loved how it handled after the easy install. also has a 3:73 monte ss rear .another good son find..lol
oh he is installing a 1994 lt1-4l60e combo.....all thats left is the header purchase and aluminum radiator and fuel line...coming soon.should be done in before christmas for sure
im sure hed like to join ..thought id see what ya think

radrambler

Think I'll put together some pics when i get home today.. Untill then :)

Scott
 

Hey Scott,ive Lurked Around For A While Looking At The Great Cars You Have On This Site And I Must Say Its Probably The Most Concentrated Set Of High End Cars Ive Seen On Any Site..i Will Try To Send You Some Pictures Of My Car Or Try To Post Them Here..again Great Site..pete..

I would if I had enough money to finish it.

does mine qualify???

https://lateral-g.net/forums/show...newpost&t=1068

it's still a looong way from being finished and the TT 355 is coming out...gonna go with something a lot bigger (almost twice as big)

Hey there new here, you can see some of my stuff on my website
http://hotrodsrestos.com

my 79 camaro isnt much now because i'm in highschool and have a limited budget but it's actually been coming along pretty well. i already got some 11 inch tires on the back because thats all i could fit without looking stupid. the exhaust is work in progress and its mostly body work now but what do u expect from a 400 dollar car that didn't run in a year. i got everything running in 2 days. i'll try to get her outside tomorrow if its sunny so i can take some nicer pics.
do u think i should submit it?

Once I set the body on the new chassis, (should happen this week) I'll get some good pics and submit mine... at least when that occurs, I can consider it a Pro-Touring car, despite the 15" wheels. :_paranoid

I just submitted my car... Hope to see it listed among the other amazing rides! :unibrow:

my 1968 camaro
 

here is my old 68 that i sold now working on my 69 camaro

I just submitted my 65 mustang. Hope to here back from ya.

i would submit my car but i ran outa money again :beathorse

Peter Stewart's 67' Camaro
 

This is my 67' Camaro that I'm working on.
Up front it has DSE arms, ATS/AFX spindles, Big discs.
An LS-7 is coming to power it, with ATS stainless headers.
UMI Delphi 4B controller & harness.
Worked T-56, Twin disc, & ATS install kit.
Ricks stealth tank, RD radiator.

78 montebu
 

hi new to your site this is my lateral machine: 1978 malibu classic with major body mods ,fiberglass montecarlo front clip ,shaved doorhandles,rollpan
,wheelbase streched,backhalf 4 link system wtith koni coilover shocks and wishbone track locator,custom rear swaybar,dodge 8.75 rear with 4.88 gears,
454 .30over,rect. heads,force efi cutler hyperflow,1000 cfm throttle body 43 lbs/hr inj., Haltech f9 fuel managemt,MSD complete billet system ,630 lift roller cam,
electric waterpump,oberg oil system, Standard elec. oil preluber,russell braided lines,supercomp headers,

hotchkiss tubelar a arms ,addco sway bar ,cadillac 12in calipers and rotors, 11 in dodge truck drum brakes

Rockland Gears viper t56 6 speed,mcleod clutch,alum radiator, alum driveshaft,alum interior ,alum engine compartment,15 gl. harwood fuel cell,6 point rollbar
lexan windshield and windows and factory air,
have new motor in works ,Magnesium block 511 bbc with titanium innards for salt flats

My 72 Hemi Javelin is progressing fine and I plan to try to finish it up this summer. I started with a 72 Javelin shell and added lots of stuff from a 2004 Hemi truck, including the drivetrain and dash as well as most of the power options. The car rides on Shockwaves in the front with a mostly stock for now front suspension. I have a Mustang rack hooked to the Hemi pump and steered by the truck wheel. I had to section the dash about 12" for it to fit. In the rear the car rides on an Air Ride angled 4 link and Shockwaves. It has an 8.8 disc brake rear out of an Explorer with 3:73 limited slip gears. The back has been minitubbed for 17x11" wheels. I added homemade subframe connectors to stiffen up the chassis. I did not put a cage in this car since I already have a Prostreet 77 AMX. Pictures can be found on Photobucket.com under Hemi Javelin.

Do you want progress pics or are you only interested in finished cars? If it's progress pics i've clogged your server with plenty!:lol:

https://lateral-g.net/forums/showthread.php4?t=4432

Use whatever you need!

John

I'll take both projects cars and finished cars, John. Your car is fantastic. We really need to get a page or 3 going to show your project. :thumbsup:

Johns car is going to be killer......also when we get done with it too! lol

I think I gonna need to delete mine for a while till I get some pics after Columbus....Because in my page it dosent look anything like that....lol

I sent you a file of my project. hope the pictures and information will work for you. let m eknow if you need further/ more info.

Just let me know what you need!!:)

John

I'm New to this and hope to be able to talk so others my projects
 

I'm New and pc stupid so beare with me. I have built Hot Rods as a hobby in the past. I have finally given in and am starting to build my first muscle car. I just bought a barn find 69 Camaro that has been stored away in Az for the last 26 years. All is not totally great as it was stored with a broken out back window so the trunk is rusted out. I am going to build my own subframes to carry C5 suspension front and rear. I have done highly modified corvette suspensions on my Hot Rods but this will be the first C5. I would like to hear from those that have good knowledge and experience. Thanks. Dj

hi scott, sent some pics of my 67 nova a few weeks ago now, let me know if you want me to resend them, thanks, mike.

Doing my best. Unfortunately, there are only 24 hours in a day. I'll get to it and all the other submissions ASAP.

sorry dude, wasn't trying to push you at all, didnt know if there had been a problem thats all, mike.

thanx scott for submitting my car!!! :thumbsup:

Hey Scott, I'm not sure if mine will apply but I am building mine as a modern daily driver....including the oversize brakes, custom suspension, IFS/IRS, LS1/LS6 (with an intended Magnuson huffer) etc etc. I sent you an email anyway just in case. I'm still in the building phase. Just finished subframing and installing/narrowing the C4 IRS. Can't wait to blast through the curves in the Ozark Mountains that I call home.

Dave

http://farm4.static.flickr.com/3107/...231f14cf_m.jpg

http://farm4.static.flickr.com/3181/...ee2b7f74_m.jpg

http://farm4.static.flickr.com/3033/...89286061_m.jpg

http://farm4.static.flickr.com/3193/...c468db9c_m.jpg

Marco's 69 Camaro
 

Scott,

Thanks for all your help getting me on Lat-G... I will submit my project as soon as I get some decent pics.
Marco

Project Z
 

Here is the beginning of my project which is a '69 Z/28 Camaro. I originally purchased the car when our daughter was two years old. Well, she'll turn 25 this October. She has been married for the last three years and just had our first grandchild, which is a boy. Hopefully as he begins to speak maybe his first words will be Hot Rod Camaro. Since family has come first for the last 23 years I'm now gearing things up to begin with my Camaro. The fire hasn't burned out and I'm anxious and excited to get started. Let me know what you think. The pics I'm sending are what I'll be starting out with and trust me I know I have a long way to go with this car.



John

I recently compiled pic of my 55 build. Have a look if ya like. I'm going to find the correct place to introduce myself :willy:

Scott,
Can we get a write up on Jimhamptons Hoover?

I would like to submit my project to lateral-g if it qualifies. If it does please let me know and i will send you what ever you need. Thanks and talk to you soon.

Josh

I'm submitting my Charger.

1980 442 W-30 (one of 346)
 

I'll be posting my project(s) as soon as I get some decent pix together.
HotRod:thumbsup:
PS: Cool Site:lateral:

Do we just post them on this thread??

i would like to submit PROJECT DARKNESS
 

i love this site and the cars and gear heads on here are some of the best.
hope you enjoy and keep building those bad ass toys.

Looks like a killer project you have coming together. Let's hear the lowdown on it. :thumbsup: