Jody congrats on the color change. Alot of guys would leave the old color and then be reminded of fact they did not change the color everytime they see that certain angle.

I have some parts off my truck currently to do some similar things that nobody else will ever notice, But If it is not right, I will always know what could have been.

:thumbsup: :thumbsup: :thumbsup:

and they keep telling me that I'm nuts!!!!

way to go:thumbsup:

Maliroid is more like it now.

LOVE it Jody!!! That silver is very classy!:thumbsup:

OK Jody...who ya kidding?:rolleyes:

Seriously,excellent choice on both the color and the wheels.I totally understand what you're saying about the color,my friend who painted my '69 also painted another '69 a very similar shade to yours.I was there the next day when it was still in the booth because I was picking up my c/f spoiler that I had them lay on more clear while they were there.I remember them test-fiting the spoiler by hand on the car in the booth and it looked killer,that color really was rich.But when they rolled it out into the sun,it almost took on kinda a feminine lavendar tone that really was off-putting.I would not have been happy had that been my car.


Bet it really pops in the sun...:thumbsup:
Oh and PS:I think you need to go back to charcoal on the spokes against that Silver.:yes:

jody, what is the new color.
rick k:cheers:

It was probably time for a rebuild anyway.....You must have had at least 500 miles on that "Beater":rofl: ...........:willy:

Ken:rolleyes:

I really like the new changes, the color looks great. I've always loved those wheels . They make the car look rugged, like its ready to take on anything.
Wayne

Looks great!!

At least I changed my mind about the color my car was painted before I re-assembled it. I give you props for taking it down again. My 2nd go seems to be taking me a lot longer too. Did you just scuff and shoot?

used the old paint job as a base and blocked the car again, sealed it, and shot the new color.

Thanks everyone for the comments, much appreciated.
Jody

getting close. Here's the flat clear on the carbon fiber wheel, dash, and console, plus changed the wheel from polished to silver powdercoat and had the paddle shifter anodized black.

http://www.camcojb.com/temp/malitude 757.jpg

Changed all the cold air plumbing on the engine to an eggshell black also instead of titanium, makes it disappear somewhat. Also had the headers coated.


http://www.camcojb.com/temp/malitude 758.jpg

http://www.camcojb.com/temp/malitude 759.jpg

Jody

That is by far the coolest Chevelle I have ever seen. Nice work! The new changes only add to an already outstanding machine.:thumbsup:
I may have missed it somewhere else but what are the specs on the engine and how much hp and tq are you getting out of it? What is the boost set at?
Eric

thanks Eric. I haven't dynoed the car yet. It's a 402 LS2, ETP 11 degree heads, twin 6776RE Precision turbos, Nelson Racing headers, Precision Metalcraft intake.

the best gets even better. awesome work Jody.

Awesome car. I'll bet it will haul asp.

Nice changes!! Love that car!! :thumbsup:

Look great Jody! I like all the changes and I think the silver is going to make a world of difference! The detail in motor compartment is beautiful!!

thanks Brent. I will not want to park it next to yours though, yours is gonna be unreal.

Jody

thanks guys.............. :thumbsup:

I really like the black knobs on the steering column as well! Might have to borrow that one!! :thumbsup:

Awesome looking car Jody.
You've done a great job. Silver looks killer and the engine looks like a nice power plant. Nice & clean!:thumbsup: :cheers:

Look up the word "Detail" in the Dictionary and Jody's Picture is there........Effort=Results....................... ........Great Job Jody....:thumbsup:

Ken

thanks guys.

Jody

Wow, looks beautiful Jody. Very nice. :thumbsup:

Yeah...whatever! :rolleyes: Thanks for the props Jody - but I think I should be the one saying that.

Now let's get some front sheetmetal on that thing!

The car looks great! By the way, what windshield wiper motor are you using?

That's a DSE unit I believe. May have been made by Mark, not sure, but DSE has an identical unit you can purchase.

Jody

Very nice. I was hoping to get a glimpse of it at this years Power Tour. At least I'll get to see Jack Ass.

finished the color sanding and buffing. Got to put the front sheetmetal and trim back on, and then get it fired up and moving. Getting close.

http://www.camcojb.com/temp/malitude%20762.jpg

http://www.camcojb.com/temp/malitude%20763.jpg

http://www.camcojb.com/temp/malitude%20764.jpg

http://www.camcojb.com/temp/malitude%20765.jpg

Love the new color with the VWW wheels Jody!!!!

I like it... I like it a lot.

Awesome ride! Love that interior and of course that kickbutt engine.:thumbsup:

thanks guys, can't wait to drive it again.

Jody

Looks great, Jody!! :thumbsup:

I wonder how it would look in red.....

Nice!

When this car is done I'm shooting it for some magazine.. if PHR doesn't want it then I will shoot it for Super Chevy and my Chevelle magazine.

Very nicely done, I so love this ride... :thumbsup:

:rofl: :lol:

Looks great Jody. Is that a new project in the back ground?

yes it is, but not for me............... ;) That's a new project for Chris (69myway) on this site, left this morning on it's way to him. I just gave him a place to park it until it could be shipped.

Jody

you are such a jackass..................... :D

Jody