Lateral-g Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Interior and Electrical (https://www.lateral-g.net/forums/forumdisplay.php?f=40)
-   -   Push Button Start, Stardrive (https://www.lateral-g.net/forums/showthread.php?t=21938)

bigtyme1 04-25-2010 11:44 AM
Quote:
Originally Posted by PASD U (Post 284278)
Would the service switch come from the wiring company or the Stardrive system? Confused on that.
Stardrive

PASD U 04-25-2010 12:15 PM
Ok. Thanks.

murtah 05-07-2010 09:20 AM
1 Attachment(s)
I also recommend Sven and Star Drive. i put one in my car last summer and it works great.

GM ECM user take note:
You will need to make some leads off your bat, ign, start, acc wires for a portable key tumbler. You need this so a computer can pull your ECM Programming in key on, motor off. Stardrive won't trip ECM in ACC.

I highly recommend that you build pigtails off the bat, ign, acc, start wires that run from your harness to the stardrive box. Terminate these leads with the 30amp capable metri pack double connectors. (380s?) You will then have bat, start, ign, acc wires from the harness that each split into a Y with metripak connectors on each end. When it is plugged into the star drive box, the other end of the Y has the male ends of the metri pak connector w/ plugs to protect against shorts. Vice versa when the Ys are plugged into a key tumbler.

bigtyme1 05-07-2010 03:33 PM
Quote:
Originally Posted by murtah (Post 286351)
I also recommend Sven and Star Drive. i put one in my car last summer and it works great.

GM ECM user take note:
You will need to make some leads off your bat, ign, start, acc wires for a portable key tumbler. You need this so a computer can pull your ECM Programming in key on, motor off. Stardrive won't trip ECM in ACC.

I highly recommend that you build pigtails off the bat, ign, acc, start wires that run from your harness to the stardrive box. Terminate these leads with the 30amp capable metri pack double connectors. (380s?) You will then have bat, start, ign, acc wires from the harness that each split into a Y with metripak connectors on each end. When it is plugged into the star drive box, the other end of the Y has the male ends of the metri pak connector w/ plugs to protect against shorts. Vice versa when the Ys are plugged into a key tumbler.
PM Sent perfect idea

Biggswole 05-09-2010 01:55 AM
I'm not sure if this is a stupid question, but does the Star Drive work with carburetors. If so, is there anything special that has to be done to make it work?

GregWeld 05-09-2010 10:03 AM
Quote:
Originally Posted by Biggswole (Post 286567)
I'm not sure if this is a stupid question, but does the Star Drive work with carburetors. If so, is there anything special that has to be done to make it work?

It would make no difference - it's just a keyless start button rather than using a key.

Dipped 05-10-2010 03:37 AM
2 Attachment(s)
Or push button start 2009 Mercedes!:unibrow:

PASD U 05-10-2010 05:59 AM
Nice, I lye keet!

What H/U is that btw? ...nevermind, I saw the info in your other thread.

sikryd 08-21-2010 02:04 PM
Does anyone know what size the mounting hole needs to be? This is from their website, but not sure if this refers to the size of the mounting hole, or the outside diameter of the button itself.

How big is the button, and the housing?
Button 15/16 , Housing 1 3/4

I emailed them, but no response yet...


All times are GMT -7. The time now is 01:55 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net