Finch shifter handles in production
 

We finally have our matching shifter handles for the shifter boot and ring assemblies. These come in 6, 8, 10, 12, and 14 inch lengths in the angled version and will have a few of the above sizes in a straight configuration. they will be offered in clear and black anodized and come with a centering and offset laser cut slug to allow for fine tuning of the shifter angle.

Pricing will be in the $115 - $120 range and custom shifter knobs to round out the kit will be coming soon

Brian -- I just sent your website link to Roy Brizio.... Just FYI.


XOXO

Are these for the T56? Can they be flipped to use forward facing or back facing? Interested in one for a RHD car.

Cheers

shifter
 

Oh,, those are nice.. me likey!

I'm in.. :thumbsup:

We'll be mocking up the tranny hopefully in a week or so.. and should figure out a length to order then.

66-67 nova spoilers available? I don't see them on the site but wanted to show my friend because he is building one right now.

Greg,

Was it the www.finchperformance.com or the hotrodtransformations site?

These will mount on any Tremec shifter and can be mounted to the right or left side and even flipped around if desired.

They are, I will work to get them on my website today with pricing.

Just the link to Finch Performance. They do some LS motors - and thought after seeing the way they ran my steam vent (into the water pump) that maybe they should be using your new hose system. As well as your vents.

Thanks Greg,

I need to figure out the length. Can you shoot me a PM with the package deal on a black vent system, Black shifter ring and boot, and shifter to dallas, tx?

hey mate the web page doesn't seem to work? can you post up a link so i can look at some more of your stuff?

PM sent

Shifters are in stock
 

I have the first run of shifters back from anodizing and ready to ship. I have both black and clear anodized angled versions in 6, 8, 10, and 12 inch overall lengths and 8 inch straight version as well.

6 and 8 inch versions are $110 shipped in the lower 48 and the 10 and 12 versions are $120 shipped.

They come with both offset and zero locating slugs for final angle adjustments.

They look fantastic Brian!

Looks awesome buddy,, guess I'll be doing some updating in the near future....

Very nice Brian. Pretty good pricing as well. Need one of these for the next project.

Just so I dont have to spend valuable time researching it... what shifter know would look best on this? Ideas? Perhaps you had one in mind when designing it.

I finally have pricing on the Nova Spoiler with all the hardware. It is $450 plus shipping so let me know if you are interested in one of these nice pieces.

Working on a Finch shifter knob to compete the package.

Nice work Brian. :thumbsup:

Need a 8 inch straight shifter, a shifter boot and 2 of the lsx steamport adapters... all in black :)

Thanks

Kevin

Thanks for the order Kevin, it is all boxed up and shipping out.

Great looking stuff! This just makes decisions even harder! LOL keep up the great work!

Nice looking set of parts!

C10 stuff
 

Would you be making any spoilers for the 67 -72 C10 s also some door handles?

Anything yet?

It looks like the spoiler is a fixed angle (welded), why not just weld braces from the spoiler to the part mounted on the car instead of the work/cost of mounting the turnbuckles & spherical joints? is it for looks?

I have built a C10 version.

As with most vehicles there is small variations and having the turnbuckles allows you to make adjustments to get the blade straight or even put a gradual curve to it along the entire unit.

I am working on some 74 to 81 Camaro units that will be fixed and mount to the deck lid vs. back of the car like the 70 - 73

New Finch part is out
 

Here is the latest part from the Finch Performance Parts line. These are machined firewall plates designed to cover up the factory opening, and give your car a custom look at a fraction of the price. No welding Is required as these bolt in place and they come drilled to fit the Vintage Air bulkhead fittings used when installing A/C. Non drilled options are also available and they come in Clear and Black anodized.

Brian, are these one size fits all, for GM, meaning are FBody, ABody, etc the same? Very Nice!!!

I know they fit the 2nd gen F body and initial measurements fit the 1st gen F body as well but have not installed one on a first gen yet. If the firewall is flat and these cover up the opening they should be universal.

The plates measure 17 inches wide and 10 inches tall

Shifter boot assembly
 

Brian did you ever do a 5 inch round ? I see it as "comins soon on your site

Hey Brian when are you gonna make a front spolier to match the rear spolier for the 66-67 NOVAS?

Shifter
 

Are you still producing these shifters?



.

Just now stumbled upon this, Nice Work!

yes, I also have a new shifter knob as well.

wow these look great!!

Can I get the knob please.. I have your shifter, please send me the quote on the knob and the stud to mount the knob