Lateral-g Forums - 2nd Chance Camaro

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - 2nd Chance Camaro - Let the Project Begin (https://www.lateral-g.net/forums/showthread.php?t=30224)

Vintage Air Drain Routing (( 04-06-23 ))

Classic Dash Final Install (( 04-07-23 ))

Quick trip to the local Ace Hardware from more supplies

http://garagescene.net/_data/i/uploa...51c0c95-me.jpg

I needed to pick up a piece of flat stock so I could install the dash surround as the holes don't line up and also need a spacer.

http://garagescene.net/_data/i/uploa...689f412-me.jpg

I can't believe I haven't removed the steering wheel as it is been in the way so many times !!!

http://garagescene.net/_data/i/uploa...d545d0e-me.jpg

http://garagescene.net/_data/i/uploa...5d9bd91-me.jpg

http://garagescene.net/_data/i/uploa...4c65187-me.jpg

http://garagescene.net/_data/i/uploa...298fe2a-me.jpg

Off to Home Depot for more hardware.

http://garagescene.net/_data/i/uploa...500b57b-me.jpg

Time to trim more of the Classic Dash Surround

http://garagescene.net/_data/i/uploa...a498f5a-me.jpg

Funny story. I was at the Doctor a couple of weeks ago and the Dermatologist used this little marker
on leg. Since I love Green & Blue I asked her if I could have the marker since they have to throw it out after they use
it. She said yes and thankfully I had it as I tried ever marker I had to mark the hole that I need to drill and nothing
worked. I decided to look in my truck and I found it and it worked perfectly.

http://garagescene.net/_data/i/uploa...fd6647b-me.jpg

http://garagescene.net/_data/i/uploa...37b378e-me.jpg

I mounted the bracket to the dash bracket with a nut and bolt (sorry no picture) however before i installed I screwed the
sheet metal screw into so it would be easier to install the surround.

http://garagescene.net/_data/i/uploa...9648a45-me.jpg

Surround is in !!!

http://garagescene.net/_data/i/uploa...c9aa9e2-me.jpg

Now for the rest of the stuff.

http://garagescene.net/_data/i/uploa...6de9a81-me.jpg

First Up is the headlight switch and if you guys have any ideas as what I can use to fill the hole below the switch I would love suggestions.

http://garagescene.net/_data/i/uploa...ed38bdb-me.jpg

Autometer Clock

http://garagescene.net/_data/i/uploa...b21f3a6-me.jpg

I know it looks crooked it's just an illusion

http://garagescene.net/_data/i/uploa...3be13d8-me.jpg

Da !!!! Next make sure you install the retaining bracket before you plug everything in.

http://garagescene.net/_data/i/uploa...2a75d98-me.jpg

http://garagescene.net/_data/i/uploa...a787f25-me.jpg

http://garagescene.net/_data/i/uploa...3cc3425-me.jpg

Holley Dash wiring

http://garagescene.net/_data/i/uploa...7736357-me.jpg

GPS Signal wire

http://garagescene.net/_data/i/uploa...e7e507f-me.jpg

http://garagescene.net/_data/i/uploa...610f5d0-me.jpg

http://garagescene.net/_data/i/uploa...dbef7b5-me.jpg

http://garagescene.net/_data/i/uploa...631ccef-me.jpg

http://garagescene.net/_data/i/uploa...7b3cbe7-me.jpg

http://garagescene.net/_data/i/uploa...30cea3c-me.jpg

http://garagescene.net/_data/i/uploa...bc624a6-me.jpg

http://garagescene.net/_data/i/uploa...a55fa6e-me.jpg

Heading out to Dinner with my wife and daughter.

http://garagescene.net/_data/i/uploa...d2cac59-me.jpg

Holley GPS Wire (( 04-07-23 ))

While I was cleaning up I notice the GPS Signal wire as not in such a great place. My plan is to wrap the
wire in TechFlex abrasion wrap to protect it.

http://garagescene.net/_data/i/uploa...1aa0872-me.jpg

http://garagescene.net/_data/i/uploa...31a9895-me.jpg

Firing Up The Holley Digital Dash (( 04-09-23 ))

I finally got back out in the garage and I am looking forward starting the car and seeing if I wired the dash correctly.

http://garagescene.net/_data/i/uploa...ed404b3-me.jpg

Yahooooooo

http://garagescene.net/_data/i/uploa...4f55e45-me.jpg

MJ-Really like the yellow striping on your R…

https://i.postimg.cc/sfBg0pNj/789844...4-E44-D2-A.jpg

As far as what goes in the hole in your dash, how about making this emoji functional…:G-Dub: Just press it every time you think of something else the ‘70 needs…and it automatically sends $500 to Holley, ARP etc.

:P

Thank you and now I need the black mirrors & gills

mj

Quote:

Originally Posted by Cosmo mentis (Post 722592)

Quote:

Originally Posted by syborg tt (Post 722597)

Thank you and now I need the black mirrors & gills

mj

Agreed.:thumbsup:

Man I'm so happy to see the blue tape exiting the scene!!

Great job Marty!

After you get the dash together, might want to calibrate the vintage air controls to make sure you're getting full sweep of all the stepper motors in the base. If you have a gen IV setup, follow this procedure, had to use it recently on a car I was working on. Doesn't matter if you have the knob setup or factory style, calibration is calibration.:thumbsup:

https://www.vintageair.com/tech-topi...control-panel/

Yeah, need to see more on the P-car!

https://www.lateral-g.net/forums/cac...500b57b-me.jpg

The heck with the Camaro! LOL, just kidding!

You are doing super job and I've never seen such documentation.

I will be honest the 35k I spent on the Cayman has to be the best money I have ever spent. However, it did slow the progress of the Camaro and thank you for the kind words.

Quote:

Originally Posted by zz430droptop67rs (Post 722617)

Yeah, need to see more on the P-car!

The heck with the Camaro! LOL, just kidding!

You are doing super job and I've never seen such documentation.