Nice - any chance to use the torque tube?

I think if it did not have pins already it would have flew off with out a doubt. I have no wheel wells and no air dam and a really un aerodynamic boat of a car still work in progress but enjoying every minute .ps. Marty congrats on getting your car out to Sema ! keep up the great work!
yes my plans are to use the front and rear suspension in my 67 firebird. not the motor going to part with that because I want to build another boost motor so going to start a Iron block build.making a kick azz video of the vettes last ride.so stay tuned for that.

I really have no idea how time could go by this fast but it sure does. we thew together a quick video of this years adventures with the Belair. we have some big plans for change this spring but for this winter I put the car out of my sight so I can focus on the Chevelle but stay tuned for big changes to come this spring to the Belair we will be going on the hot rod power tour this june and we hope to see some of you guys there. please check out some of our other videos as well and let me know what you think.

[yt]https://www.youtube.com/watch?v=AT3UMOa0_40[/yt]

http://https://www.youtube.com/watch?v=AT3UMOa0_40

ended up getting the car out of storage early to display the car for MSRA. at the MPLS. auto show. it will be on display there till next sun.if you have spring fever and need to get out of the house as bad as I do go check out some new and old cars there. It was a bit dicey driving the car there with freezing rain keep in mind that there is still over 3 feet of snow on the ground no heater,no wipers,no defrost and bald tires but we made it and it is there now. can't wait to do some major changes to the car coming up soon.:D so stay tuned for that.
http://i643.photobucket.com/albums/u...psa760461c.jpg

I was there yesterday! Seeing your car was one of the highlights, for sure!

LOL, towing a camper and road racing? Nice job, it's cool to see a car in use rather than project mode!

Thanks for the interest and the comments stay tuned in for more to come on this one lots more!

lol. the car is far from done just driveable mock up right now. just having to much fun driving it right now to tear everything apart to finish it. That is why I started the 70 chevelle that is mine also and I am going to build that one complete then I can finish this one after that.I may have taking on a bit much but lucky for me I can swim.:drowninga: lol.

Its looking good Eric. Must feel good to get out after all this crappy weather. The bike looks great too.

thanks Wayne I hope you are making progress on your car I really want to see that on the road this summer!

oh it has been a ass kicker of a couple of weeks! decided to jump back on the Belair and make some big changes finally getting to the tires and wheels it did not go quite as planned the 305's were just a touch to big for the rear and had to go back and the 285's would work in the front with some slight a arm mods. however the front wheels were only 8.5" Not 9.5 that the guy told me they were so I used the 285's in the rear on a 10" rim and ordered up some 255's for the front the tires that I was running on the rear were 275/35/20 and the new 285/35/20's were 1.5" wider each makes no sense to me but this is were we are now and it is going to have to work!http://i643.photobucket.com/albums/u...ps25e131f0.jpg
http://i643.photobucket.com/albums/u...ps6b4d6091.jpg

the rims were pretty curb rashed and they were also clear coated so it took forever to sand the dings and scrapes out of them. and i kind of like the brushed look to them! even more after sanding them for days!