well good to know it could handle the pressure =D ...but ya the BOV will only save the turbos if the tbs are closed but anyways yes i still want it haha but not looking good still .... :(

The wastegates control the amount of boost pressure, which in this case will be about 7psi. The BOV relieves residual boost pressure when the throttle is released.

The intake is safe as long as we can make it fit :D

Looks like the Tb's and compressor are getting ground down!

That would be sick......unless it rained. :lol:

Direct water injection.... Isn't that good for forced induction set ups? :)

The manifold is bad ass.... Make it fit.... It makes the car

The shop cut into the dash today and welded in my dash insert that Kevin Oeste made and fabbed up a spot for the push button. Top hole is for a vent and the bottom oval is the vintage air control knobs. Still trying to get the manifold to work with the AC compressor so no updates on that yet.

http://i527.photobucket.com/albums/c...0/b3d406c7.jpg
http://i527.photobucket.com/albums/c...0/26dcc724.jpg

Looks good.

Ill email you tomorrow about the MAF Sensor.

Im doing a push start as well. where did your push start button

its a lexus button

Dash is ready to be primed and painted! Lookin good!!!:unibrow: :unibrow:

http://i527.photobucket.com/albums/c...0/5a2262cf.jpg